Yolinux.com

clock_getres manpage

Search topic Section


CLOCK_GETRES(2)		   Linux Programmer's Manual	       CLOCK_GETRES(2)



NAME
       clock_getres, clock_gettime, clock_settime - clock and time functions

SYNOPSIS
       #include <time.h>

       int clock_getres(clockid_t clk_id, struct timespec *res);

       int clock_gettime(clockid_t clk_id, struct timespec *tp);

       int clock_settime(clockid_t clk_id, const struct timespec *tp);

       Link with -lrt (only for glibc versions before 2.17).

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       clock_getres(), clock_gettime(), clock_settime():
	      _POSIX_C_SOURCE >= 199309L

DESCRIPTION
       The  function  clock_getres()  finds  the resolution (precision) of the
       specified clock clk_id, and, if res  is	non-NULL,  stores  it  in  the
       struct timespec pointed to by res.  The resolution of clocks depends on
       the implementation and cannot be configured by  a  particular  process.
       If  the	time value pointed to by the argument tp of clock_settime() is
       not a multiple of res, then it is truncated to a multiple of res.

       The functions clock_gettime() and clock_settime() retrieve and set  the
       time of the specified clock clk_id.

       The  res	 and  tp  arguments  are  timespec structures, as specified in
       <time.h>:

	   struct timespec {
	       time_t	tv_sec;	       /* seconds */
	       long	tv_nsec;       /* nanoseconds */
	   };

       The clk_id argument is the identifier of the particular clock on	 which
       to  act.	  A  clock  may	 be system-wide and hence visible for all pro-
       cesses, or per-process  if  it  measures	 time  only  within  a	single
       process.

       All  implementations  support the system-wide real-time clock, which is
       identified by CLOCK_REALTIME.  Its time represents seconds and nanosec-
       onds  since the Epoch.  When its time is changed, timers for a relative
       interval are unaffected, but timers for an absolute point in  time  are
       affected.

       More  clocks may be implemented.	 The interpretation of the correspond-
       ing time values and the effect on timers is unspecified.

       Sufficiently recent versions of glibc and the Linux kernel support  the
       following clocks:

       CLOCK_REALTIME
	      System-wide  clock  that	measures real (i.e., wall-clock) time.
	      Setting this clock requires appropriate privileges.  This	 clock
	      is  affected by discontinuous jumps in the system time (e.g., if
	      the system administrator manually changes the clock), and by the
	      incremental adjustments performed by adjtime(3) and NTP.

       CLOCK_REALTIME_COARSE (since Linux 2.6.32; Linux-specific)
	      A	 faster	 but less precise version of CLOCK_REALTIME.  Use when
	      you need very fast, but not fine-grained	timestamps.   Requires
	      per-architecture support, and probably also architecture support
	      for this flag in the vdso(7).

       CLOCK_MONOTONIC
	      Clock that cannot be set and  represents	monotonic  time	 since
	      some  unspecified starting point.	 This clock is not affected by
	      discontinuous jumps in the system	 time  (e.g.,  if  the	system
	      administrator  manually  changes	the clock), but is affected by
	      the incremental adjustments performed by adjtime(3) and NTP.

       CLOCK_MONOTONIC_COARSE (since Linux 2.6.32; Linux-specific)
	      A faster but less precise version of CLOCK_MONOTONIC.  Use  when
	      you  need	 very fast, but not fine-grained timestamps.  Requires
	      per-architecture support, and probably also architecture support
	      for this flag in the vdso(7).

       CLOCK_MONOTONIC_RAW (since Linux 2.6.28; Linux-specific)
	      Similar  to  CLOCK_MONOTONIC, but provides access to a raw hard-
	      ware-based time that is not subject to NTP  adjustments  or  the
	      incremental adjustments performed by adjtime(3).

       CLOCK_BOOTTIME (since Linux 2.6.39; Linux-specific)
	      Identical	 to  CLOCK_MONOTONIC, except it also includes any time
	      that the system is suspended.  This allows applications to get a
	      suspend-aware  monotonic	clock  without having to deal with the
	      complications of CLOCK_REALTIME, which may have  discontinuities
	      if the time is changed using settimeofday(2) or similar.

       CLOCK_PROCESS_CPUTIME_ID (since Linux 2.6.12)
	      Per-process  CPU-time  clock  (measures CPU time consumed by all
	      threads in the process).

       CLOCK_THREAD_CPUTIME_ID (since Linux 2.6.12)
	      Thread-specific CPU-time clock.

RETURN VALUE
       clock_gettime(), clock_settime(), and clock_getres() return 0 for  suc-
       cess, or -1 for failure (in which case errno is set appropriately).

ERRORS
       EFAULT tp points outside the accessible address space.

       EINVAL The clk_id specified is not supported on this system.

       EPERM  clock_settime()  does not have permission to set the clock indi-
	      cated.

VERSIONS
       These system calls first appeared in Linux 2.6.

ATTRIBUTES
       For  an	explanation  of	 the  terms  used   in	 this	section,   see
       attributes(7).

       +---------------------------------+---------------+---------+
       |Interface			 | Attribute	 | Value   |
       +---------------------------------+---------------+---------+
       |clock_getres(), clock_gettime(), | Thread safety | MT-Safe |
       |clock_settime()			 |		 |	   |
       +---------------------------------+---------------+---------+

CONFORMING TO
       POSIX.1-2001, POSIX.1-2008, SUSv2.

AVAILABILITY
       On POSIX systems on which these functions  are  available,  the	symbol
       _POSIX_TIMERS  is defined in <unistd.h> to a value greater than 0.  The
       symbols _POSIX_MONOTONIC_CLOCK,	_POSIX_CPUTIME,	 _POSIX_THREAD_CPUTIME
       indicate	     that      CLOCK_MONOTONIC,	     CLOCK_PROCESS_CPUTIME_ID,
       CLOCK_THREAD_CPUTIME_ID are available.  (See also sysconf(3).)

NOTES
       POSIX.1 specifies the following:

	      Setting the value of the	CLOCK_REALTIME	clock  via  clock_set-
	      time()  shall have no effect on threads that are blocked waiting
	      for a relative time service based upon this clock, including the
	      nanosleep()  function;  nor on the expiration of relative timers
	      based upon this clock.  Consequently, these time services	 shall
	      expire  when  the	 requested relative interval elapses, indepen-
	      dently of the new or old value of the clock.

   Historical note for SMP systems
       Before Linux added  kernel  support  for	 CLOCK_PROCESS_CPUTIME_ID  and
       CLOCK_THREAD_CPUTIME_ID,	 glibc	implemented these clocks on many plat-
       forms using timer registers from the CPUs (TSC on i386, AR.ITC on  Ita-
       nium).	These  registers  may differ between CPUs and as a consequence
       these clocks may return bogus results  if  a  process  is  migrated  to
       another CPU.

       If  the	CPUs in an SMP system have different clock sources, then there
       is no way to maintain a correlation between the timer  registers	 since
       each  CPU  will	run at a slightly different frequency.	If that is the
       case, then clock_getcpuclockid(0) will return ENOENT  to	 signify  this
       condition.   The	 two  clocks  will  then  be  useful only if it can be
       ensured that a process stays on a certain CPU.

       The processors in an SMP system do not start all at  exactly  the  same
       time and therefore the timer registers are typically running at an off-
       set.  Some architectures include code that attempts to limit these off-
       sets  on bootup.	 However, the code cannot guarantee to accurately tune
       the offsets.  Glibc contains no provisions to deal with	these  offsets
       (unlike	the  Linux  Kernel).   Typically  these	 offsets are small and
       therefore the effects may be negligible in most cases.

       Since glibc 2.4, the wrapper functions for the system  calls  described
       in  this page avoid the abovementioned problems by employing the kernel
       implementation of CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID,
       on  systems that provide such an implementation (i.e., Linux 2.6.12 and
       later).

BUGS
       According to POSIX.1-2001, a process with "appropriate privileges"  may
       set  the	 CLOCK_PROCESS_CPUTIME_ID  and	CLOCK_THREAD_CPUTIME_ID clocks
       using clock_settime().  On Linux, these clocks are not settable	(i.e.,
       no process has "appropriate privileges").

SEE ALSO
       date(1),	  gettimeofday(2),   settimeofday(2),	time(2),   adjtime(3),
       clock_getcpuclockid(3), ctime(3),  ftime(3),  pthread_getcpuclockid(3),
       sysconf(3), time(7), vdso(7), hwclock(8)

COLOPHON
       This  page  is  part of release 4.10 of the Linux man-pages project.  A
       description of the project, information about reporting bugs,  and  the
       latest	  version     of     this    page,    can    be	   found    at
       https://www.kernel.org/doc/man-pages/.



				  2016-12-12		       CLOCK_GETRES(2)