GET_MEMPOLICY(2)	   Linux Programmer's Manual	      GET_MEMPOLICY(2)



NAME
       get_mempolicy - retrieve NUMA memory policy for a thread

SYNOPSIS
       #include <numaif.h>

       int get_mempolicy(int *mode, unsigned long *nodemask,
			 unsigned long maxnode, void *addr,
			 unsigned long flags);

       Link with -lnuma.

DESCRIPTION
       get_mempolicy() retrieves the NUMA policy of the calling thread or of a
       memory address, depending on the setting of flags.

       A NUMA machine has different memory  controllers	 with  different  dis-
       tances  to  specific  CPUs.   The memory policy defines from which node
       memory is allocated for the thread.

       If flags is specified as 0, then information about the calling thread's
       default policy (as set by set_mempolicy(2)) is returned, in the buffers
       pointed to by mode and nodemask.	 The value returned in these arguments
       may  be used to restore the thread's policy to its state at the time of
       the call to get_mempolicy() using set_mempolicy(2).  When flags	is  0,
       addr must be specified as NULL.

       If  flags specifies MPOL_F_MEMS_ALLOWED (available since Linux 2.6.24),
       the mode argument is ignored and the set of nodes (memories)  that  the
       thread  is  allowed  to	specify	 in  subsequent	 calls	to mbind(2) or
       set_mempolicy(2) (in the absence of any	mode  flags)  is  returned  in
       nodemask.   It  is  not	permitted  to combine MPOL_F_MEMS_ALLOWED with
       either MPOL_F_ADDR or MPOL_F_NODE.

       If flags specifies MPOL_F_ADDR, then information is returned about  the
       policy  governing the memory address given in addr.  This policy may be
       different from the thread's default policy if mbind(2) or  one  of  the
       helper functions described in numa(3) has been used to establish a pol-
       icy for the memory range containing addr.

       If the mode argument is not NULL, then get_mempolicy() will  store  the
       policy mode and any optional mode flags of the requested NUMA policy in
       the location pointed to by this argument.  If  nodemask	is  not	 NULL,
       then  the  nodemask  associated	with  the policy will be stored in the
       location pointed to by this argument.  maxnode specifies the number  of
       node IDs that can be stored into nodemask--that is, the maximum node ID
       plus one.  The value specified by maxnode is always rounded to a multi-
       ple of sizeof(unsigned long)*8.

       If  flags  specifies  both MPOL_F_NODE and MPOL_F_ADDR, get_mempolicy()
       will return the node ID of the node on which the address addr is	 allo-
       cated  into  the	 location pointed to by mode.  If no page has yet been
       allocated for the specified address, get_mempolicy()  will  allocate  a
       page  as	 if  the  thread  had  performed  a read (load) access to that
       address, and return the ID of the node where that page was allocated.

       If flags specifies MPOL_F_NODE, but not MPOL_F_ADDR, and	 the  thread's
       current	policy is MPOL_INTERLEAVE, then get_mempolicy() will return in
       the location pointed to by a non-NULL mode argument, the node ID of the
       next  node  that will be used for interleaving of internal kernel pages
       allocated on behalf of the thread.  These allocations include pages for
       memory-mapped  files  in process memory ranges mapped using the mmap(2)
       call with the MAP_PRIVATE flag for read accesses, and in memory	ranges
       mapped with the MAP_SHARED flag for all accesses.

       Other flag values are reserved.

       For an overview of the possible policies see set_mempolicy(2).

RETURN VALUE
       On  success,  get_mempolicy()  returns  0; on error, -1 is returned and
       errno is set to indicate the error.

ERRORS
       EFAULT Part of all of the memory range specified by nodemask and	 maxn-
	      ode points outside your accessible address space.

       EINVAL The  value  specified by maxnode is less than the number of node
	      IDs supported by the system.  Or flags  specified	 values	 other
	      than  MPOL_F_NODE or MPOL_F_ADDR; or flags specified MPOL_F_ADDR
	      and addr is NULL, or flags did not specify MPOL_F_ADDR and  addr
	      is   not	 NULL.	  Or,  flags  specified	 MPOL_F_NODE  but  not
	      MPOL_F_ADDR and the current thread  policy  is  not  MPOL_INTER-
	      LEAVE.   Or,  flags  specified  MPOL_F_MEMS_ALLOWED  with either
	      MPOL_F_ADDR or MPOL_F_NODE.  (And there are other EINVAL cases.)

VERSIONS
       The get_mempolicy() system call was added to the Linux kernel  in  ver-
       sion 2.6.7.

CONFORMING TO
       This system call is Linux-specific.

NOTES
       For information on library support, see numa(7).

SEE ALSO
       getcpu(2),   mbind(2),  mmap(2),	 set_mempolicy(2),  numa(3),  numa(7),
       numactl(8)

COLOPHON
       This page is part of release 4.10 of the Linux  man-pages  project.   A
       description  of	the project, information about reporting bugs, and the
       latest	 version    of	  this	  page,	   can	   be	  found	    at
       https://www.kernel.org/doc/man-pages/.



Linux				  2016-12-12		      GET_MEMPOLICY(2)