Yolinux.com

ldap_table manpage

Search topic Section


LDAP_TABLE(5)		      File Formats Manual		 LDAP_TABLE(5)



NAME
       ldap_table - Postfix LDAP client configuration

SYNOPSIS
       postmap -q "string" ldap:/etc/postfix/filename

       postmap -q - ldap:/etc/postfix/filename <inputfile

DESCRIPTION
       The  Postfix  mail system uses optional tables for address rewriting or
       mail routing. These tables are usually in dbm or db format.

       Alternatively, lookup tables can be specified as LDAP databases.

       In order to use LDAP lookups, define an LDAP source as a	 lookup	 table
       in main.cf, for example:

	   alias_maps = ldap:/etc/postfix/ldap-aliases.cf

       The  file /etc/postfix/ldap-aliases.cf has the same format as the Post-
       fix main.cf file, and can specify the parameters	 described  below.  An
       example is given at the end of this manual.

       This  configuration  method  is	available with Postfix version 2.1 and
       later.  See the section "BACKWARDS COMPATIBILITY" below for older Post-
       fix versions.

       For  details  about  LDAP  SSL and STARTTLS, see the section on SSL and
       STARTTLS below.

BACKWARDS COMPATIBILITY
       For backwards compatibility with Postfix version 2.0 and earlier,  LDAP
       parameters  can	also  be defined in main.cf.  Specify as LDAP source a
       name that doesn't begin with a slash or a  dot.	 The  LDAP  parameters
       will then be accessible as the name you've given the source in its def-
       inition, an underscore, and the name of the parameter.  For example, if
       the  map is specified as "ldap:ldapsource", the "server_host" parameter
       below would be defined in main.cf as "ldapsource_server_host".

       Note: with this form, the passwords for the LDAP sources are written in
       main.cf,	 which is normally world-readable.  Support for this form will
       be removed in a future Postfix version.

       Postfix 2.2 has enhanced query interfaces  for  MySQL  and  PostgreSQL.
       These include features that were previously available only in the Post-
       fix LDAP client. This work also created an opportunity for improvements
       in  the	LDAP  interface.  The  primary	compatibility  issue  is  that
       result_filter (a name that has caused some confusion as to its  meaning
       in the past) has been renamed to result_format.	For backwards compati-
       bility with the pre 2.2 LDAP client, result_filter can for now be  used
       instead	of  result_format,  when the latter parameter is not also set.
       The new name better reflects the function of the parameter.  This  com-
       patibility interface may be removed in a future release.

LIST MEMBERSHIP
       When  using  LDAP  to  store lists such as $mynetworks, $mydestination,
       $relay_domains, $local_recipient_maps, etc., it is important to	under-
       stand that the table must store each list member as a separate key. The
       table lookup verifies the *existence* of the key.  See  "Postfix	 lists
       versus tables" in the DATABASE_README document for a discussion.

       Do  NOT create tables that return the full list of domains in $mydesti-
       nation or $relay_domains etc., or IP addresses in $mynetworks.

       DO create tables with each matching item as a key and with an arbitrary
       value. With LDAP databases it is not uncommon to return the key itself.

       For example, NEVER do this in a map defining $mydestination:

	   query_filter = domain=*
	   result_attribute = domain

       Do this instead:

	   query_filter = domain=%s
	   result_attribute = domain

GENERAL LDAP PARAMETERS
       In  the	text  below,  default  values are given in parentheses.	 Note:
       don't use quotes in these variables; at least, not  until  the  Postfix
       configuration routines understand how to deal with quoted strings.

       server_host (default: localhost)
	      The name of the host running the LDAP server, e.g.

		  server_host = ldap.example.com

	      Depending	 on the LDAP client library you're using, it should be
	      possible to specify multiple servers here, with the library try-
	      ing  them	 in order should the first one fail. It should also be
	      possible to give each server in the list a different port (over-
	      riding server_port below), by naming them like

		  server_host = ldap.example.com:1444

	      With OpenLDAP, a (list of) LDAP URLs can be used to specify both
	      the hostname(s) and the port(s):

		  server_host = ldap://ldap.example.com:1444
			      ldap://ldap2.example.com:1444

	      All LDAP URLs accepted by the OpenLDAP  library  are  supported,
	      including	 connections  over  UNIX  domain sockets, and LDAP SSL
	      (the last one provided that OpenLDAP was compiled	 with  support
	      for SSL):

		  server_host = ldapi://%2Fsome%2Fpath
			      ldaps://ldap.example.com:636

       server_port (default: 389)
	      The port the LDAP server listens on, e.g.

		  server_port = 778

       timeout (default: 10 seconds)
	      The number of seconds a search can take before timing out, e.g.

		  timeout = 5

       search_base (No default; you must configure this)
	      The RFC2253 base DN at which to conduct the search, e.g.

		  search_base = dc=your, dc=com

	      With Postfix 2.2 and later this parameter supports the following
	      '%' expansions:

	      %%     This is replaced by a literal '%' character.

	      %s     This is replaced by the input key.	 RFC 2253  quoting  is
		     used  to  make sure that the input key does not add unex-
		     pected metacharacters.

	      %u     When the input key is an address of the form user@domain,
		     %u is replaced by the (RFC 2253) quoted local part of the
		     address.  Otherwise, %u is replaced by the entire	search
		     string.   If  the	localpart is empty, the search is sup-
		     pressed and returns no results.

	      %d     When the input key is an address of the form user@domain,
		     %d	 is  replaced  by the (RFC 2253) quoted domain part of
		     the address.  Otherwise, the  search  is  suppressed  and
		     returns no results.

	      %[SUD] For the search_base parameter, the upper-case equivalents
		     of the  above  expansions	behave	identically  to	 their
		     lower-case	 counter-parts. With the result_format parame-
		     ter (previously called result_filter see the  COMPATIBIL-
		     ITY  section and below), they expand to the corresponding
		     components of input key rather than the result value.

	      %[1-9] The patterns %1, %2, ... %9 are replaced  by  the	corre-
		     sponding  most  significant  component of the input key's
		     domain. If the input key is  user@mail.example.com,  then
		     %1 is com, %2 is example and %3 is mail. If the input key
		     is unqualified or does not have enough domain  components
		     to satisfy all the specified patterns, the search is sup-
		     pressed and returns no results.

       query_filter (default: mailacceptinggeneralid=%s)
	      The RFC2254 filter used to search the directory, where %s	 is  a
	      substitute for the address Postfix is trying to resolve, e.g.

		  query_filter = (&(mail=%s)(paid_up=true))

	      This parameter supports the following '%' expansions:

	      %%     This is replaced by a literal '%' character. (Postfix 2.2
		     and later).

	      %s     This is replaced by the input key.	 RFC 2254  quoting  is
		     used  to  make sure that the input key does not add unex-
		     pected metacharacters.

	      %u     When the input key is an address of the form user@domain,
		     %u is replaced by the (RFC 2254) quoted local part of the
		     address.  Otherwise, %u is replaced by the entire	search
		     string.   If  the	localpart is empty, the search is sup-
		     pressed and returns no results.

	      %d     When the input key is an address of the form user@domain,
		     %d	 is  replaced  by the (RFC 2254) quoted domain part of
		     the address.  Otherwise, the  search  is  suppressed  and
		     returns no results.

	      %[SUD] The upper-case equivalents of the above expansions behave
		     in the query_filter parameter identically to their lower-
		     case  counter-parts.  With	 the  result_format  parameter
		     (previously called result_filter  see  the	 COMPATIBILITY
		     section and below), they expand to the corresponding com-
		     ponents of input key rather than the result value.

		     The above %S, %U and %D  expansions  are  available  with
		     Postfix 2.2 and later.

	      %[1-9] The  patterns  %1,	 %2, ... %9 are replaced by the corre-
		     sponding most significant component of  the  input	 key's
		     domain.  If  the input key is user@mail.example.com, then
		     %1 is com, %2 is example and %3 is mail. If the input key
		     is	 unqualified or does not have enough domain components
		     to satisfy all the specified patterns, the search is sup-
		     pressed and returns no results.

		     The above %1, ..., %9 expansions are available with Post-
		     fix 2.2 and later.

	      The "domain" parameter described below limits the input keys  to
	      addresses	 in  matching  domains. When the "domain" parameter is
	      non-empty, LDAP queries for unqualified addresses	 or  addresses
	      in non-matching domains are suppressed and return no results.

	      NOTE: DO NOT put quotes around the query_filter parameter.

       result_format (default: %s)
	      Called  result_filter  in Postfix releases prior to 2.2.	Format
	      template applied to result attributes.  Most  commonly  used  to
	      append  (or prepend) text to the result. This parameter supports
	      the following '%' expansions:

	      %%     This is replaced by a literal '%' character. (Postfix 2.2
		     and later).

	      %s     This  is  replaced	 by the value of the result attribute.
		     When result is empty it is skipped.

	      %u     When the result attribute value is an address of the form
		     user@domain,  %u  is  replaced  by	 the local part of the
		     address. When the result has an  empty  localpart	it  is
		     skipped.

	      %d     When  a  result attribute value is an address of the form
		     user@domain, %d is replaced by the	 domain	 part  of  the
		     attribute	value.	When  the  result is unqualified it is
		     skipped.

	      %[SUD1-9]
		     The upper-case and decimal digit  expansions  interpolate
		     the  parts of the input key rather than the result. Their
		     behavior is identical to that described  with  query_fil-
		     ter,  and	in  fact  because  the	input  key is known in
		     advance, lookups whose  key  does	not  contain  all  the
		     information  specified  in	 the  result template are sup-
		     pressed and return no results.

		     The above %S, %U, %D  and	%1,  ...,  %9  expansions  are
		     available with Postfix 2.2 and later.

	      For example, using "result_format = smtp:[%s]" allows one to use
	      a mailHost attribute as the basis of a transport(5) table. After
	      applying	the result format, multiple values are concatenated as
	      comma separated  strings.	 The  expansion_limit  and  size_limit
	      parameters  explained  below allow one to restrict the number of
	      values in the result, which is especially useful for  maps  that
	      should return a single value.

	      The  default value %s specifies that each attribute value should
	      be used as is.

	      This parameter was  called  result_filter	 in  Postfix  releases
	      prior  to	 2.2. If no "result_format" is specified, the value of
	      "result_filter" will be used instead  before  resorting  to  the
	      default  value.  This provides compatibility with old configura-
	      tion files.

	      NOTE: DO NOT put quotes around the result format!

       domain (default: no domain list)
	      This is a list of domain names, paths to files, or dictionaries.
	      When  specified,	only  fully qualified search keys with a *non-
	      empty* localpart and a matching domain are eligible for  lookup:
	      'user'  lookups,	bare  domain lookups and "@domain" lookups are
	      not performed. This can significantly reduce the query  load  on
	      the LDAP server.

		  domain = postfix.org, hash:/etc/postfix/searchdomains

	      It  is  best  not	 to use LDAP to store the domains eligible for
	      LDAP lookups.

	      NOTE: DO NOT define this parameter for local(8) aliases.

	      This feature is available in Postfix 1.0 and later.

       result_attribute (default: maildrop)
	      The attribute(s) Postfix will read from  any  directory  entries
	      returned by the lookup, to be resolved to an email address.

		  result_attribute = mailbox, maildrop

       special_result_attribute (default: empty)
	      The  attribute(s)	 of  directory entries that can contain DNs or
	      URLs. If found, a recursive  subsequent  search  is  done	 using
	      their values.

		  special_result_attribute = memberdn

	      DN  recursion  retrieves	the same result_attributes as the main
	      query, including the special attributes for  further  recursion.
	      URI processing retrieves only those attributes that are included
	      in   the	 URI   definition   and	  are	*also*	  listed    in
	      "result_attribute".  If  the  URI lists any of the map's special
	      result attributes, these are  also  retrieved  and  used	recur-
	      sively.

       terminal_result_attribute (default: empty)
	      When one or more terminal result attributes are found in an LDAP
	      entry, all other result attributes are ignored and only the ter-
	      minal  result  attributes are returned. This is useful for dele-
	      gating expansion of group members to a particular host, by using
	      an optional "maildrop" attribute on selected groups to route the
	      group to a specific host, where the group is expanded,  possibly
	      via mailing-list manager or other special processing.

		  terminal_result_attribute = maildrop

	      This feature is available with Postfix 2.4 or later.

       leaf_result_attribute (default: empty)
	      When  one	 or more special result attributes are found in a non-
	      terminal (see above) LDAP	 entry,	 leaf  result  attributes  are
	      excluded	from  the expansion of that entry. This is useful when
	      expanding groups and the desired mail  address  attribute(s)  of
	      the  member  objects  obtained  via DN or URI recursion are also
	      present in the group object. To only return the attribute values
	      from  the	 leaf  objects	and  not the containing group, add the
	      attribute	 to  the  leaf_result_attribute	 list,	and  not   the
	      result_attribute	list,  which  is  always  expanded.  Note, the
	      default value of "result_attribute" is not empty, you  may  want
	      to set it explicitly empty when using "leaf_result_attribute" to
	      expand the group to a list of member  DN	addresses.  If	groups
	      have both member DN references AND attributes that hold multiple
	      string valued rfc822 addresses, then the string attributes go in
	      "result_attribute".   The	 attributes  that  represent the email
	      addresses of objects referenced via a DN (or  LDAP  URI)	go  in
	      "leaf_result_attribute".

		  result_attribute = memberaddr
		  special_result_attribute = memberdn
		  terminal_result_attribute = maildrop
		  leaf_result_attribute = mail

	      This feature is available with Postfix 2.4 or later.

       scope (default: sub)
	      The  LDAP search scope: sub, base, or one.  These translate into
	      LDAP_SCOPE_SUBTREE, LDAP_SCOPE_BASE, and LDAP_SCOPE_ONELEVEL.

       bind (default: yes)
	      Whether or not to bind to the LDAP server. Newer LDAP  implemen-
	      tations  don't  require clients to bind, which saves time. Exam-
	      ple:

		  bind = no

	      If you do need to bind, you might consider  configuring  Postfix
	      to  connect  to the local machine on a port that's an SSL tunnel
	      to your LDAP server. If your LDAP server doesn't	natively  sup-
	      port  SSL,  put  a  tunnel (wrapper, proxy, whatever you want to
	      call it) on that system too. This should	prevent	 the  password
	      from traversing the network in the clear.

       bind_dn (default: empty)
	      If  you  do  have	 to  bind, do it with this distinguished name.
	      Example:

		  bind_dn = uid=postfix, dc=your, dc=com

       bind_pw (default: empty)
	      The password for the distinguished name above. If	 you  have  to
	      use  this,  you probably want to make the map configuration file
	      readable only by the  Postfix  user.  When  using	 the  obsolete
	      ldap:ldapsource  syntax,	with  map parameters in main.cf, it is
	      not possible to  securely	 store	the  bind  password.  This  is
	      because  main.cf	needs  to  be  world  readable	to allow local
	      accounts to submit mail via the sendmail command. Example:

		  bind_pw = postfixpw

       cache (IGNORED with a warning)

       cache_expiry (IGNORED with a warning)

       cache_size (IGNORED with a warning)
	      The above parameters are NO LONGER SUPPORTED by Postfix.	 Cache
	      support has been dropped from OpenLDAP as of release 2.1.13.

       recursion_limit (default: 1000)
	      A	 limit	on  the	 nesting  depth	 of  DN and URL special result
	      attribute evaluation. The limit must be a non-zero positive num-
	      ber.

       expansion_limit (default: 0)
	      A	 limit	on  the total number of result elements returned (as a
	      comma separated list) by a lookup against the map.  A setting of
	      zero  disables the limit. Lookups fail with a temporary error if
	      the limit is exceeded.  Setting the  limit  to  1	 ensures  that
	      lookups do not return multiple values.

       size_limit (default: $expansion_limit)
	      A	 limit	on  the	 number of LDAP entries returned by any single
	      LDAP search performed as part of the lookup. A setting of 0 dis-
	      ables  the  limit.   Expansion of DN and URL references involves
	      nested LDAP queries, each of which is  separately	 subjected  to
	      this limit.

	      Note:  even  a  single  LDAP  entry can generate multiple lookup
	      results, via  multiple  result  attributes  and/or  multi-valued
	      result  attributes. This limit caps the per search resource uti-
	      lization on the LDAP server, not the final multiplicity  of  the
	      lookup   result.	 It   is  analogous  to	 the  "-z"  option  of
	      "ldapsearch".

       dereference (default: 0)
	      When to dereference LDAP aliases. (Note that this has nothing do
	      with  Postfix aliases.) The permitted values are those legal for
	      the OpenLDAP/UM LDAP implementations:

	      0	     never

	      1	     when searching

	      2	     when locating the base object for the search

	      3	     always

	      See ldap.h or the ldap_open(3) or ldapsearch(1)  man  pages  for
	      more  information.  And if you're using an LDAP package that has
	      other possible values, please bring it to the attention  of  the
	      postfix-users@postfix.org mailing list.

       chase_referrals (default: 0)
	      Sets  (or	 clears)  LDAP_OPT_REFERRALS  (requires LDAP version 3
	      support).

       version (default: 2)
	      Specifies the LDAP protocol version to use.

       debuglevel (default: 0)
	      What level to set for debugging in the OpenLDAP libraries.

LDAP SSL AND STARTTLS PARAMETERS
       If you're using the OpenLDAP libraries compiled with SSL support, Post-
       fix can connect to LDAP SSL servers and can issue the STARTTLS command.

       LDAP  SSL  service  can	be  requested  by  using a LDAP SSL URL in the
       server_host parameter:

	   server_host = ldaps://ldap.example.com:636

       STARTTLS can be turned on with the start_tls parameter:

	   start_tls = yes

       Both forms require LDAP protocol version 3, which has to be set explic-
       itly with:

	   version = 3

       If  any	of the Postfix programs querying the map is configured in mas-
       ter.cf to run chrooted, all the certificates and keys involved have  to
       be  copied  to the chroot jail. Of course, the private keys should only
       be readable by the user "postfix".

       The following parameters are relevant to LDAP SSL and STARTTLS:

       start_tls (default: no)
	      Whether or not to issue STARTTLS upon connection to the  server.
	      Don't set this with LDAP SSL (the SSL session is setup automati-
	      cally when the TCP connection is opened).

       tls_ca_cert_dir (No default; set either this or tls_ca_cert_file)
	      Directory containing X509 Certificate Authority certificates  in
	      PEM  format  which are to be recognized by the client in SSL/TLS
	      connections. The files each contain  one	CA  certificate.   The
	      files  are  looked  up  by the CA subject name hash value, which
	      must hence be available. If more than one	 CA  certificate  with
	      the  same name hash value exist, the extension must be different
	      (e.g. 9d66eef0.0, 9d66eef0.1 etc). The search  is	 performed  in
	      the  ordering of the extension number, regardless of other prop-
	      erties of the certificates. Use the c_rehash utility  (from  the
	      OpenSSL distribution) to create the necessary links.

       tls_ca_cert_file (No default; set either this or tls_ca_cert_dir)
	      File  containing	the X509 Certificate Authority certificates in
	      PEM format which are to be recognized by the client  in  SSL/TLS
	      connections. This setting takes precedence over tls_ca_cert_dir.

       tls_cert (No default; you must set this)
	      File  containing	client's  X509	certificate  to be used by the
	      client in SSL/ TLS connections.

       tls_key (No default; you must set this)
	      File containing the  private  key	 corresponding	to  the	 above
	      tls_cert.

       tls_require_cert (default: no)
	      Whether  or  not	to request server's X509 certificate and check
	      its validity when establishing SSL/TLS  connections.   The  sup-
	      ported values are no and yes.

	      With  no, the server certificate trust chain is not checked, but
	      with OpenLDAP prior to 2.1.13, the name in the  server  certifi-
	      cate  must still match the LDAP server name. With OpenLDAP 2.0.0
	      to 2.0.11 the server name is not necessarily what you specified,
	      rather  it is determined (by reverse lookup) from the IP address
	      of the LDAP server connection. With OpenLDAP  prior  to  2.0.13,
	      subjectAlternativeName extensions in the LDAP server certificate
	      are ignored: the server name must match the subject  CommonName.
	      The  no setting corresponds to the never value of TLS_REQCERT in
	      LDAP client configuration files.

	      Don't use TLS with OpenLDAP 2.0.x (and especially with x <=  11)
	      if you can avoid it.

	      With yes, the server certificate must be issued by a trusted CA,
	      and not be expired. The LDAP server name must match one  of  the
	      name(s) found in the certificate (see above for OpenLDAP library
	      version dependent behavior). The yes setting corresponds to  the
	      demand value of TLS_REQCERT in LDAP client configuration files.

	      The  "try" and "never" values of TLS_REQCERT have no equivalents
	      here. They are not available with OpenLDAP 2.0, and in any  case
	      have questionable security properties. Either you want TLS veri-
	      fied LDAP connections, or you don't.

	      The yes value only works correctly with Postfix 2.5  and	later,
	      or with OpenLDAP 2.0. Earlier Postfix releases or later OpenLDAP
	      releases don't work together with this setting. Support for LDAP
	      over TLS was added to Postfix based on the OpenLDAP 2.0 API.

       tls_random_file (No default)
	      Path of a file to obtain random bits from when /dev/[u]random is
	      not available, to be used by the client in SSL/TLS connections.

       tls_cipher_suite (No default)
	      Cipher suite to use in SSL/TLS negotiations.

EXAMPLE
       Here's a basic example for using LDAP  to  look	up  local(8)  aliases.
       Assume that in main.cf, you have:

	   alias_maps = hash:/etc/aliases,
		   ldap:/etc/postfix/ldap-aliases.cf

       and in ldap:/etc/postfix/ldap-aliases.cf you have:

	   server_host = ldap.example.com
	   search_base = dc=example, dc=com

       Upon  receiving mail for a local address "ldapuser" that isn't found in
       the /etc/aliases database, Postfix will search the LDAP server  listen-
       ing  at port 389 on ldap.example.com.  It will bind anonymously, search
       for any directory entries  whose	 mailacceptinggeneralid	 attribute  is
       "ldapuser",  read the "maildrop" attributes of those found, and build a
       list of their maildrops, which will be treated as RFC822	 addresses  to
       which the message will be delivered.

SEE ALSO
       postmap(1), Postfix lookup table manager
       postconf(5), configuration parameters
       mysql_table(5), MySQL lookup tables
       pgsql_table(5), PostgreSQL lookup tables

README FILES
       Use  "postconf readme_directory" or "postconf html_directory" to locate
       this information.
       DATABASE_README, Postfix lookup table overview
       LDAP_README, Postfix LDAP client guide

LICENSE
       The Secure Mailer license must be distributed with this software.

AUTHOR(S)
       Carsten Hoeger, Hery Rakotoarisoa, John Hensley, Keith Stevenson,  LaM-
       ont  Jones,  Liviu Daia, Manuel Guesdon, Mike Mattice, Prabhat K Singh,
       Sami Haahtinen, Samuel Tardieu, Victor Duchovni, and many others.



								 LDAP_TABLE(5)