Yolinux.com

lvm.conf manpage

Search topic Section


LVM.CONF(5)		      File Formats Manual		   LVM.CONF(5)



NAME
       lvm.conf -- Configuration file for LVM2

SYNOPSIS
       /etc/lvm/lvm.conf

DESCRIPTION
       lvm.conf	 is  loaded  during  the initialisation phase of lvm(8).  This
       file can in turn lead to other files being loaded -  settings  read  in
       later  override	earlier settings.  File timestamps are checked between
       commands and if any have changed, all the files are reloaded.

       The settings defined in lvm.conf can be	overridden  by	any  of	 these
       extended configuration methods:

       direct config override on command line
	      The  --config  ConfigurationString command line option takes the
	      ConfigurationString as direct string representation of the  con-
	      figuration  to override the existing configuration. The Configu-
	      rationString is of exactly the same format as used  in  any  LVM
	      configuration file.


       profile config
	      A	 profile  is a set of selected customizable configuration set-
	      tings that are aimed to achieve  a  certain  characteristics  in
	      various  environments  or	 uses.	It's used to override existing
	      configuration.  Normally, the name of the profile should reflect
	      that environment or use.

	      There  are  two  groups of profiles recognised: command profiles
	      and metadata profiles.

	      The command profile is used to override  selected	 configuration
	      settings at global LVM command level - it is applied at the very
	      beginning of LVM command execution and it is used throughout the
	      whole  time  of  LVM  command  execution. The command profile is
	      applied by using the --commandprofile ProfileName	 command  line
	      option that is recognised by all LVM2 commands.

	      The  metadata profile is used to override selected configuration
	      settings at Volume Group/Logical Volume level -  it  is  applied
	      independently for each Volume Group/Logical Volume that is being
	      processed. As such, each Volume Group/Logical Volume  can	 store
	      the  profile  name  used in its metadata so next time the Volume
	      Group/Logical Volume is processed, the profile is applied	 auto-
	      matically.  If  Volume Group and any of its Logical Volumes have
	      different profiles defined, the profile defined for the  Logical
	      Volume	is    preferred.   The	 metadata   profile   can   be
	      attached/detached by using the lvchange  and  vgchange  commands
	      and  their  --metadataprofile  ProfileName  and  --detachprofile
	      options or the --metadataprofile	option	during	creation  when
	      using  vgcreate  or lvcreate command.  The vgs and lvs reporting
	      commands provide -o vg_profile and -o lv_profile output  options
	      to  show	the  metadata  profile	currently attached to a Volume
	      Group or a Logical Volume.

	      The set of options allowed  for  command	profiles  is  mutually
	      exclusive	 when compared to the set of options allowed for meta-
	      data profiles. The settings that belong to either of  these  two
	      sets can't be mixed together and LVM tools will reject such pro-
	      files.

	      LVM itself provides a  few  predefined  configuration  profiles.
	      Users  are allowed to add more profiles with different values if
	      needed.  For  this  purpose,  there's  the  command_profile_tem-
	      plate.profile  (for  command profiles) and metadata_profile_tem-
	      plate.profile (for metadata profiles) which contain all settings
	      that  are	 customizable  by  profiles of certain type. Users are
	      encouraged to copy these template	 profiles  and	edit  them  as
	      needed.  Alternatively,  the  lvmconfig --file <ProfileName.pro-
	      file> --type profilable-command <section>	 or  lvmconfig	--file
	      <ProfileName.profile>  --type  profilable-metadata <section> can
	      be used to generate a configuration with profilable settings  in
	      either of the type for given section and save it to new Profile-
	      Name.profile (if the section is not  specified,  all  profilable
	      settings are reported).

	      The   profiles  are  stored  in  /etc/lvm/profile	 directory  by
	      default.	This location can be changed by using the  config/pro-
	      file_dir	setting.  Each profile configuration is stored in Pro-
	      fileName.profile file in the profile directory. When referencing
	      the profile, the .profile suffix is left out.


       tag config
	      See tags configuration setting description below.


       When  several  configuration methods are used at the same time and when
       LVM looks for the value of a particular setting, it traverses this con-
       fig cascade from left to right:

       direct  config  override	 on  command line -> command profile config ->
       metadata profile config -> tag config -> lvmlocal.conf -> lvm.conf

       No part of this cascade is compulsory.  If  there's  no	setting	 value
       found  at the end of the cascade, a default value is used for that set-
       ting.  Use lvmconfig to check what settings are in  use	and  what  the
       default values are.

SYNTAX
       This section describes the configuration file syntax.

       Whitespace  is  not  significant unless it is within quotes.  This pro-
       vides a wide choice of acceptable indentation styles.   Comments	 begin
       with # and continue to the end of the line.  They are treated as white-
       space.

       Here is an informal grammar:

       file = value*
	      A configuration file consists of a set of values.

       value = section | assignment
	      A value can either be a new section, or an assignment.

       section = identifier '{' value* '}'
	      A section groups associated values together. If the same section
	      is encountered multiple times, the contents of all instances are
	      concatenated together in the order of appearance.
	      It is denoted by a name and delimited by curly brackets.
	      e.g. backup {
			...
		   }

       assignment = identifier '=' ( array | type )
	      An assignment associates a type with an identifier. If the iden-
	      tifier  contains	forward slashes, those are interpreted as path
	      delimiters. The statement section/key = value is	equivalent  to
	      section  {  key = value }. If multiple instances of the same key
	      are encountered, only the last value is used (and a  warning  is
	      issued).
	      e.g. level = 7

       array =	'[' ( type ',')* type ']' | '[' ']'
	      Inhomogeneous arrays are supported.
	      Elements must be separated by commas.
	      An empty array is acceptable.

       type = integer | float | string
	      integer = [0-9]*
	      float = [0-9]*'.'[0-9]*
	      string = '"'.*'"'

	      Strings  with  spaces  must be enclosed in double quotes, single
	      words that start with a letter can be left unquoted.


SETTINGS
       The lvmconfig command prints the LVM configuration settings in  various
       ways.  See the man page lvmconfig(8).

       Command	to  print  a  list of all possible config settings, with their
       default values:
       lvmconfig --type default

       Command to print a list of all possible	config	settings,  with	 their
       default values, and a full description of each as a comment:
       lvmconfig --type default --withcomments

       Command	to  print  a  list of all possible config settings, with their
       current values (configured, non-default values are shown):
       lvmconfig --type current

       Command to print all config settings that have been configured  with  a
       different  value	 than  the default (configured, non-default values are
       shown):
       lvmconfig --type diff

       Command to print a single config setting, with its default value, and a
       full  description,  where  "Section" refers to the config section, e.g.
       global, and "Setting" refers to the name of the specific setting,  e.g.
       umask:
       lvmconfig --type default --withcomments Section/Setting



FILES
       /etc/lvm/lvm.conf
       /etc/lvm/lvmlocal.conf
       /etc/lvm/archive
       /etc/lvm/backup
       /etc/lvm/cache/.cache
       /var/lock/lvm
       /etc/lvm/profile


SEE ALSO
       lvm(8) lvmconfig(8)




Sistina Software UKLVM TOOLS 2.02.166(2)-RHEL7 (2016-11-16)	   LVM.CONF(5)