Yolinux.com

random manpage

Search topic Section


RANDOM(4)		   Linux Programmer's Manual		     RANDOM(4)



NAME
       random, urandom - kernel random number source devices

SYNOPSIS
       #include <linux/random.h>

       int ioctl(fd, RNDrequest, param);

DESCRIPTION
       The character special files /dev/random and /dev/urandom (present since
       Linux 1.3.30) provide an interface to the kernel's random number gener-
       ator.   The file /dev/random has major device number 1 and minor device
       number 8.  The file /dev/urandom has major device number	 1  and	 minor
       device number 9.

       The  random  number  generator  gathers environmental noise from device
       drivers and other sources into an entropy  pool.	  The  generator  also
       keeps  an  estimate of the number of bits of noise in the entropy pool.
       From this entropy pool, random numbers are created.

       Linux 3.17 and later provides the simpler and safer getrandom(2) inter-
       face  which requires no special files; see the getrandom(2) manual page
       for details.

       When read, the /dev/urandom device returns random bytes using a pseudo-
       random  number generator seeded from the entropy pool.  Reads from this
       device do not block (i.e., the CPU is not yielded), but	can  incur  an
       appreciable delay when requesting large amounts of data.

       When read during early boot time, /dev/urandom may return data prior to
       the entropy pool being initialized.  If this  is	 of  concern  in  your
       application, use getrandom(2) or /dev/random instead.

       The /dev/random device is a legacy interface which dates back to a time
       where the  cryptographic	 primitives  used  in  the  implementation  of
       /dev/urandom were not widely trusted.  It will return random bytes only
       within the estimated number of bits of fresh noise in the entropy pool,
       blocking	 if  necessary.	 /dev/random is suitable for applications that
       need high quality randomness, and can afford indeterminate delays.

       When the entropy pool is empty, reads from /dev/random will block until
       additional  environmental  noise is gathered.  If open(2) is called for
       /dev/random with the O_NONBLOCK flag, a	subsequent  read(2)  will  not
       block  if the requested number of bytes is not available.  Instead, the
       available bytes are returned.  If no byte is  available,	 read(2)  will
       return -1 and errno will be set to EAGAIN.

       The  O_NONBLOCK	flag  has  no  effect when opening /dev/urandom.  When
       calling read(2) for the device /dev/urandom, reads of up to  256	 bytes
       will  return as many bytes as are requested and will not be interrupted
       by a signal handler.  Reads with a buffer over this  limit  may	return
       less  than  the requested number of bytes or fail with the error EINTR,
       if interrupted by a signal handler.

       Since Linux 3.16, a read(2) from /dev/urandom will return  at  most  32
       MB.   A	read(2)	 from  /dev/random  will return at most 512 bytes (340
       bytes on Linux kernels before version 2.6.12).

       Writing to /dev/random or /dev/urandom will  update  the	 entropy  pool
       with  the  data	written,  but this will not result in a higher entropy
       count.  This means that it will impact  the  contents  read  from  both
       files, but it will not make reads from /dev/random faster.

   Usage
       The  /dev/random	 interface  is	considered  a  legacy  interface,  and
       /dev/urandom is preferred and sufficient in all	use  cases,  with  the
       exception  of  applications  which require randomness during early boot
       time; for  these	 applications,	getrandom(2)  must  be	used  instead,
       because it will block until the entropy pool is initialized.

       If  a seed file is saved across reboots as recommended below (all major
       Linux distributions have done this since 2000 at least), the output  is
       cryptographically secure against attackers without local root access as
       soon as it is reloaded in the boot sequence, and perfectly adequate for
       network	encryption  session  keys.   Since  reads from /dev/random may
       block, users will usually want to open it in nonblocking mode (or  per-
       form  a	read with timeout), and provide some sort of user notification
       if the desired entropy is not immediately available.

   Configuration
       If your system does  not	 have  /dev/random  and	 /dev/urandom  created
       already, they can be created with the following commands:

	   mknod -m 666 /dev/random c 1 8
	   mknod -m 666 /dev/urandom c 1 9
	   chown root:root /dev/random /dev/urandom

       When  a	Linux  system starts up without much operator interaction, the
       entropy pool may be in a fairly predictable state.   This  reduces  the
       actual  amount  of  noise  in  the entropy pool below the estimate.  In
       order to counteract this effect, it helps to carry entropy pool	infor-
       mation  across  shut-downs and start-ups.  To do this, add the lines to
       an appropriate script which is run during  the  Linux  system  start-up
       sequence:

	   echo "Initializing random number generator..."
	   random_seed=/var/run/random-seed
	   # Carry a random seed from start-up to start-up
	   # Load and then save the whole entropy pool
	   if [ -f $random_seed ]; then
	       cat $random_seed >/dev/urandom
	   else
	       touch $random_seed
	   fi
	   chmod 600 $random_seed
	   poolfile=/proc/sys/kernel/random/poolsize
	   [ -r $poolfile ] && bits=$(cat $poolfile) || bits=4096
	   bytes=$(expr $bits / 8)
	   dd if=/dev/urandom of=$random_seed count=1 bs=$bytes

       Also,  add  the	following  lines in an appropriate script which is run
       during the Linux system shutdown:

	   # Carry a random seed from shut-down to start-up
	   # Save the whole entropy pool
	   echo "Saving random seed..."
	   random_seed=/var/run/random-seed
	   touch $random_seed
	   chmod 600 $random_seed
	   poolfile=/proc/sys/kernel/random/poolsize
	   [ -r $poolfile ] && bits=$(cat $poolfile) || bits=4096
	   bytes=$(expr $bits / 8)
	   dd if=/dev/urandom of=$random_seed count=1 bs=$bytes

       In  the	above  examples,  we  assume  Linux  2.6.0  or	later,	 where
       /proc/sys/kernel/random/poolsize	 returns  the size of the entropy pool
       in bits (see below).

   /proc interfaces
       The files  in  the  directory  /proc/sys/kernel/random  (present	 since
       2.3.16) provide additional information about the /dev/random device:

       entropy_avail
	      This  read-only file gives the available entropy, in bits.  This
	      will be a number in the range 0 to 4096.

       poolsize
	      This file gives the size of the entropy pool.  The semantics  of
	      this file vary across kernel versions:

	      Linux 2.4:
		     This  file	 gives	the size of the entropy pool in bytes.
		     Normally, this file will have the value 512,  but	it  is
		     writable,	and  can  be changed to any value for which an
		     algorithm is available.  The choices  are	32,  64,  128,
		     256, 512, 1024, or 2048.

	      Linux 2.6 and later
		     This file is read-only, and gives the size of the entropy
		     pool in bits.  It contains the value 4096.

       read_wakeup_threshold
	      This file contains the number of bits of	entropy	 required  for
	      waking   up  processes  that  sleep  waiting  for	 entropy  from
	      /dev/random.  The default is 64.

       write_wakeup_threshold
	      This file contains the number of bits of entropy below which  we
	      wake  up	processes  that	 do  a	select(2) or poll(2) for write
	      access to /dev/random.  These values can be changed  by  writing
	      to the files.

       uuid and boot_id
	      These    read-only    files    contain   random	strings	  like
	      6fd5a44b-35f4-4ad4-a9b9-6b9be13e1fe9.  The former	 is  generated
	      afresh for each read, the latter was generated once.

   ioctl(2) interface
       The  following  ioctl(2)	 requests are defined on file descriptors con-
       nected to either /dev/random or /dev/urandom.  All  requests  performed
       will  interact  with  the input entropy pool impacting both /dev/random
       and /dev/urandom.  The CAP_SYS_ADMIN capability	is  required  for  all
       requests except RNDGETENTCNT.

       RNDGETENTCNT
	      Retrieve	the entropy count of the input pool, the contents will
	      be the same as the entropy_avail file under  proc.   The	result
	      will be stored in the int pointed to by the argument.

       RNDADDTOENTCNT
	      Increment	 or  decrement	the entropy count of the input pool by
	      the value pointed to by the argument.

       RNDGETPOOL
	      Removed in Linux 2.6.9.

       RNDADDENTROPY
	      Add some additional entropy to the input pool, incrementing  the
	      entropy  count.	This  differs  from  writing to /dev/random or
	      /dev/urandom, which only adds some data but does	not  increment
	      the entropy count.  The following structure is used:

		  struct rand_pool_info {
		      int    entropy_count;
		      int    buf_size;
		      __u32  buf[0];
		  };

	      Here  entropy_count  is  the value added to (or subtracted from)
	      the entropy count, and buf is the buffer of size buf_size	 which
	      gets added to the entropy pool.

       RNDZAPENTCNT, RNDCLEARPOOL
	      Zero  the	 entropy  count	 of all pools and add some system data
	      (such as wall clock) to the pools.

NOTES
       For an overview and comparison of the various interfaces	 that  can  be
       used to obtain randomness, see random(7).

BUGS
       During  early  boot time, reads from /dev/urandom may return data prior
       to the entropy pool being initialized.

FILES
       /dev/random
       /dev/urandom

SEE ALSO
       mknod(1), getrandom(2), random(7)

       RFC 1750, "Randomness Recommendations for Security"

COLOPHON
       This page is part of release 4.10 of the Linux  man-pages  project.   A
       description  of	the project, information about reporting bugs, and the
       latest	 version    of	  this	  page,	   can	   be	  found	    at
       https://www.kernel.org/doc/man-pages/.



Linux				  2017-03-13			     RANDOM(4)