Yolinux.com

semget manpage

Search topic Section


SEMGET(2)		   Linux Programmer's Manual		     SEMGET(2)



NAME
       semget - get a System V semaphore set identifier

SYNOPSIS
       #include <sys/types.h>
       #include <sys/ipc.h>
       #include <sys/sem.h>

       int semget(key_t key, int nsems, int semflg);

DESCRIPTION
       The  semget() system call returns the System V semaphore set identifier
       associated with the argument key.  A new set  of	 nsems	semaphores  is
       created	if  key	 has the value IPC_PRIVATE or if no existing semaphore
       set is associated with key and IPC_CREAT is specified in semflg.

       If semflg specifies both IPC_CREAT and IPC_EXCL	and  a	semaphore  set
       already	exists	for key, then semget() fails with errno set to EEXIST.
       (This is analogous to the effect of the combination  O_CREAT  |	O_EXCL
       for open(2).)

       Upon  creation,	the  least  significant	 9 bits of the argument semflg
       define the permissions (for owner, group and others) for the  semaphore
       set.   These  bits  have	 the same format, and the same meaning, as the
       mode argument of open(2) (though the execute permissions are not	 mean-
       ingful  for  semaphores, and write permissions mean permission to alter
       semaphore values).

       When creating a new semaphore set, semget() initializes the set's asso-
       ciated data structure, semid_ds (see semctl(2)), as follows:

	      sem_perm.cuid  and sem_perm.uid are set to the effective user ID
	      of the calling process.

	      sem_perm.cgid and sem_perm.gid are set to the effective group ID
	      of the calling process.

	      The  least  significant  9  bits of sem_perm.mode are set to the
	      least significant 9 bits of semflg.

	      sem_nsems is set to the value of nsems.

	      sem_otime is set to 0.

	      sem_ctime is set to the current time.

       The argument nsems can be 0 (a don't care) when a semaphore set is  not
       being  created.	 Otherwise, nsems must be greater than 0 and less than
       or equal	 to  the  maximum  number  of  semaphores  per	semaphore  set
       (SEMMSL).

       If the semaphore set already exists, the permissions are verified.

RETURN VALUE
       If successful, the return value will be the semaphore set identifier (a
       nonnegative integer), otherwise, -1 is returned, with errno  indicating
       the error.

ERRORS
       On failure, errno will be set to one of the following:

       EACCES A semaphore set exists for key, but the calling process does not
	      have permission to  access  the  set,  and  does	not  have  the
	      CAP_IPC_OWNER  capability in the user namespace that governs its
	      IPC namespace.

       EEXIST IPC_CREAT and IPC_EXCL were specified in semflg, but a semaphore
	      set already exists for key.

       EINVAL nsems  is less than 0 or greater than the limit on the number of
	      semaphores per semaphore set (SEMMSL).

       EINVAL A semaphore set corresponding to key already exists,  but	 nsems
	      is larger than the number of semaphores in that set.

       ENOENT No  semaphore  set  exists  for  key  and semflg did not specify
	      IPC_CREAT.

       ENOMEM A semaphore set has to be created but the system does  not  have
	      enough memory for the new data structure.

       ENOSPC A	 semaphore  set has to be created but the system limit for the
	      maximum number of semaphore sets (SEMMNI), or  the  system  wide
	      maximum number of semaphores (SEMMNS), would be exceeded.

CONFORMING TO
       SVr4, POSIX.1-2001.

NOTES
       The  inclusion of <sys/types.h> and <sys/ipc.h> isn't required on Linux
       or by any version of POSIX.  However, some old implementations required
       the inclusion of these header files, and the SVID also documented their
       inclusion.  Applications intended to be portable to  such  old  systems
       may need to include these header files.

       IPC_PRIVATE isn't a flag field but a key_t type.	 If this special value
       is used for key, the system call ignores all but the least  significant
       9 bits of semflg and creates a new semaphore set (on success).

   Semaphore initialization
       The  values of the semaphores in a newly created set are indeterminate.
       (POSIX.1-2001 and POSIX.1-2008 are explicit  on	this  point,  although
       POSIX.1-2008 notes that a future version of the standard may require an
       implementation to initialize the semaphores  to	0.)   Although	Linux,
       like many other implementations, initializes the semaphore values to 0,
       a portable application cannot rely on this: it should  explicitly  ini-
       tialize the semaphores to the desired values.

       Initialization  can be done using semctl(2) SETVAL or SETALL operation.
       Where multiple peers do not know who will be the	 first	to  initialize
       the set, checking for a nonzero sem_otime in the associated data struc-
       ture retrieved by a semctl(2) IPC_STAT operation can be used  to	 avoid
       races.

   Semaphore limits
       The  following  limits  on  semaphore set resources affect the semget()
       call:

       SEMMNI System-wide limit on the number of  semaphore  sets.   On	 Linux
	      systems  before  version	3.19, the default value for this limit
	      was 128.	Since Linux 3.19, the default  value  is  32,000.   On
	      Linux,  this limit can be read and modified via the fourth field
	      of /proc/sys/kernel/sem.

       SEMMSL Maximum number of semaphores per semaphore ID.  On Linux systems
	      before  version  3.19, the default value for this limit was 250.
	      Since Linux 3.19, the default value is 32,000.  On  Linux,  this
	      limit   can  be  read  and  modified  via	 the  first  field  of
	      /proc/sys/kernel/sem.

       SEMMNS System-wide limit on the number of semaphores: policy  dependent
	      (on  Linux,  this	 limit can be read and modified via the second
	      field of /proc/sys/kernel/sem).  Note that the number  of	 sema-
	      phores  system-wide is also limited by the product of SEMMSL and
	      SEMMNI.

BUGS
       The name choice IPC_PRIVATE was perhaps unfortunate, IPC_NEW would more
       clearly show its function.

SEE ALSO
       semctl(2),   semop(2),	ftok(3),   capabilities(7),   sem_overview(7),
       svipc(7)

COLOPHON
       This page is part of release 4.10 of the Linux  man-pages  project.   A
       description  of	the project, information about reporting bugs, and the
       latest	 version    of	  this	  page,	   can	   be	  found	    at
       https://www.kernel.org/doc/man-pages/.



Linux				  2016-10-08			     SEMGET(2)