Yolinux.com

snmpcmd manpage

Search topic Section


SNMPCMD(1)			   Net-SNMP			    SNMPCMD(1)



NAME
       snmpcmd - options and behaviour common to most of the Net-SNMP command-
       line tools

SYNOPSIS
       snmpcmd [OPTIONS] AGENT [PARAMETERS]

DESCRIPTION
       This manual page describes the common options for  the  SNMP  commands:
       snmpbulkget,  snmpbulkwalk,  snmpdelta,	snmpget, snmpgetnext, snmpnet-
       stat, snmpset, snmpstatus, snmptable, snmptest, snmptrap,  snmpdf, snm-
       pusm  , snmpwalk .  The command line applications use the SNMP protocol
       to communicate with an SNMP capable network entity, an agent.  Individ-
       ual applications typically (but not necessarily) take additional param-
       eters that are given after the agent specification.   These  parameters
       are documented in the manual pages for each application.


OPTIONS
       -3[MmKk]	 0xHEXKEY
	      Sets the keys to be used for SNMPv3 transactions.	 These options
	      allow you to set the master authentication and  encryption  keys
	      (-3m  and	 -3M respectively) or set the localized authentication
	      and encryption keys (-3k and -3K respectively).  SNMPv3 keys can
	      be  either passed in by hand using these flags, or by the use of
	      keys generated from passwords using the -A  and  -X  flags  dis-
	      cussed  below.   For  further details on SNMPv3 and its usage of
	      keying  information,  see	 the  Net-SNMP	tutorial  web  site  (
	      http://www.Net-SNMP.org/tutorial-5/commands/  ).	 Overrides the
	      defAuthMasterKey (-3m),  defPrivMasterKey	 (-3M),	 defAuthLocal-
	      izedKey (-3k) or defPrivLocalizedKey (-3K) tokens, respectively,
	      in the snmp.conf file, see snmp.conf(5).

       -a authProtocol
	      Set the authentication protocol (MD5 or SHA) used for  authenti-
	      cated  SNMPv3  messages.	Overrides the defAuthType token in the
	      snmp.conf file.

       -A authPassword
	      Set the authentication pass phrase used for authenticated SNMPv3
	      messages.	   Overrides   the   defAuthPassphrase	token  in  the
	      snmp.conf file. It is insecure to specify pass  phrases  on  the
	      command line, see snmp.conf(5).

       -c community
	      Set the community string for SNMPv1/v2c transactions.  Overrides
	      the defCommunity token in the snmp.conf file.

       -d     Dump (in hexadecimal) the raw SNMP packets sent and received.

       -D TOKEN[,...]
	      Turn on debugging output for the given TOKEN(s).	 Try  ALL  for
	      extremely verbose output.

       -e engineID
	      Set  the	authoritative  (security)  engineID  used  for	SNMPv3
	      REQUEST messages.	 It is	typically  not	necessary  to  specify
	      this, as it will usually be discovered automatically.

       -E engineID
	      Set the context engineID used for SNMPv3 REQUEST messages scope-
	      dPdu.  If not specified, this will default to the	 authoritative
	      engineID.

       -h, --help
	      Display a brief usage message and then exit.

       -H     Display  a  list	of configuration file directives understood by
	      the command and then exit.

       -I [brRhu]
	      Specifies input parsing options. See INPUT OPTIONS below.

       -l secLevel
	      Set  the	securityLevel  used  for  SNMPv3  messages  (noAuthNo-
	      Priv|authNoPriv|authPriv).  Appropriate pass phrase(s) must pro-
	      vided when using any level higher than noAuthNoPriv.   Overrides
	      the defSecurityLevel token in the snmp.conf file.

       -L [eEfFoOsS]
	      Specifies output logging options. See LOGGING OPTIONS below.

       -m MIBLIST
	      Specifies	 a  colon separated list of MIB modules (not files) to
	      load for this application.  This	overrides  (or	augments)  the
	      environment variable MIBS, the snmp.conf directive mibs, and the
	      list of MIBs hardcoded into the Net-SNMP library.

	      If MIBLIST has a leading '-' or '+' character, then the MIB mod-
	      ules  listed  are loaded in addition to the default list, coming
	      before or after this list respectively.  Otherwise,  the	speci-
	      fied MIBs are loaded instead of this default list.

	      The  special  keyword ALL is used to load all MIB modules in the
	      MIB directory search list.  Every file whose name does not begin
	      with "." will be parsed as if it were a MIB file.

       -M DIRLIST
	      Specifies	 a  colon  separated list of directories to search for
	      MIBs.  This overrides (or	 augments)  the	 environment  variable
	      MIBDIRS, the snmp.conf directive mibdirs, and the default direc-
	      tory hardcoded into the Net-SNMP library (/usr/share/snmp/mibs).

	      If DIRLIST has a leading '-' or '+' character,  then  the	 given
	      directories are added to the default list, being searched before
	      or after the directories on this list respectively.   Otherwise,
	      the  specified  directories are searched instead of this default
	      list.

	      Note that the directories appearing later in the list have  have
	      precedence over earlier ones.  To avoid searching any MIB direc-
	      tories, set the MIBDIRS environment variable to the empty string
	      ("").

	      Note that MIBs specified using the -m option or the mibs config-
	      uration directive will be loaded from  one  of  the  directories
	      listed by the -M option (or equivalents).	 The mibfile directive
	      takes a full path to the specified MIB file, so  this  does  not
	      need to be in the MIB directory search list.

       -n contextName
	      Set  the contextName used for SNMPv3 messages.  The default con-
	      textName is the empty string "".	Overrides the defContext token
	      in the snmp.conf file.

       -O [abeEfnqQsStTuUvxX]
	      Specifies output printing options. See OUTPUT OPTIONS below.

       -P [cdeRuwW]
	      Specifies MIB parsing options.  See MIB PARSING OPTIONS below.

       -r retries
	      Specifies	 the number of retries to be used in the requests. The
	      default is 5.

       -t timeout
	      Specifies the timeout in seconds between retries. The default is
	      1.   Floating  point numbers can be used to specify fractions of
	      seconds.

       -u secName
	      Set the securityName used	 for  authenticated  SNMPv3  messages.
	      Overrides the defSecurityName token in the snmp.conf file.

       -v 1 | 2c | 3
	      Specifies	 the  protocol	version to use: 1 (RFCs 1155-1157), 2c
	      (RFCs 1901-1908), or 3 (RFCs 2571-2574).	The default  is	 typi-
	      cally   version  3.   Overrides  the  defVersion	token  in  the
	      snmp.conf file.

       -V, --version
	      Display version information for the application and then exit.

       -x privProtocol
	      Set the privacy protocol (DES or AES) used for encrypted	SNMPv3
	      messages.	  Overrides  the  defPrivType  token  in the snmp.conf
	      file. This option is only valid if  the  Net-SNMP	 software  was
	      build to use OpenSSL.

       -X privPassword
	      Set  the privacy pass phrase used for encrypted SNMPv3 messages.
	      Overrides the defPrivPassphrase token in the snmp.conf file.  It
	      is  insecure  to	specify	 pass phrases on the command line, see
	      snmp.conf(5).

       -Z boots,time
	      Set the engineBoots and engineTime used for authenticated SNMPv3
	      messages.	  This	will initialize the local notion of the agents
	      boots/time with an authenticated value stored in the LCD.	 It is
	      typically	 not necessary to specify this option, as these values
	      will usually be discovered automatically.

       -Yname="value"

       --name="value"
	      Allows to specify any token ("name") supported in the  snmp.conf
	      file  and sets its value to "value". Overrides the corresponding
	      token in the snmp.conf file. See snmp.conf(5) for the full  list
	      of tokens.


AGENT SPECIFICATION
       The string AGENT in the SYNOPSIS above specifies the remote SNMP entity
       with which to communicate.  This specification takes the form:

	      [<transport-specifier>:]<transport-address>

       At its simplest, the AGENT specification may consist of a hostname,  or
       an  IPv4 address in the standard "dotted quad" notation.	 In this case,
       communication will be attempted using UDP/IPv4 to port 161 of the given
       host.   Otherwise, the <transport-address> part of the specification is
       parsed according to the following table:

	   <transport-specifier>       <transport-address> format

	   udp			       hostname[:port] or IPv4-address[:port]

	   tcp			       hostname[:port] or IPv4-address[:port]

	   unix			       pathname

	   ipx			       [network]:node[/port]

	   aal5pvc or pvc	       [interface.][VPI.]VCI

	   udp6 or udpv6 or udpipv6    hostname[:port] or IPv6-address:port or
					'['IPv6-address']'[:port]

	   tcp6 or tcpv6 or tcpipv6    hostname[:port] or IPv6-address:port or
					'['IPv6-address']'[:port]

       Note that <transport-specifier> strings are case-insensitive  so	 that,
       for  example,  "tcp" and "TCP" are equivalent.  Here are some examples,
       along with their interpretation:

       hostname:161	       perform query using UDP/IPv4 datagrams to host-
			       name on port 161.  The ":161" is redundant here
			       since that is the  default  SNMP	 port  in  any
			       case.

       udp:hostname	       identical  to  the previous specification.  The
			       "udp:" is redundant here since UDP/IPv4 is  the
			       default transport.

       TCP:hostname:1161       connect to hostname on port 1161 using TCP/IPv4
			       and perform query over that connection.

       ipx::00D0B7AAE308       perform query using IPX datagrams to node  num-
			       ber  00D0B7AAE308  on  the default network, and
			       using the default IPX port of 36879 (900F hexa-
			       decimal), as suggested in RFC 1906.

       ipx:0AE43409:00D0B721C6C0/1161
			       perform	query using IPX datagrams to port 1161
			       on node number 00D0B721C6C0 on  network	number
			       0AE43409.

       unix:/tmp/local-agent   connect	to  the Unix domain socket /tmp/local-
			       agent, and perform the query over that  connec-
			       tion.

       /tmp/local-agent	       identical  to the previous specification, since
			       the Unix domain is the  default	transport  iff
			       the  first character of the <transport-address>
			       is a '/'.

       alias:myname	       perform a connection to the myname alias	 which
			       needs to be defined in the snmp.conf file using
			       a line like " alias  myname  udp:127.0.0.1:9161
			       ".   Any	 type  of  transport definition can be
			       used as the alias expansion parameter.  Aliases
			       are particularly useful for using repeated com-
			       plex transport strings.

       AAL5PVC:100	       perform the query using AAL5 PDUs sent  on  the
			       permanent   virtual   circuit  with  VPI=0  and
			       VCI=100 (decimal) on the first ATM  adapter  in
			       the machine.

       PVC:1.10.32	       perform	the  query using AAL5 PDUs sent on the
			       permanent virtual circuit with VPI=10 (decimal)
			       and  VCI=32 (decimal) on the second ATM adapter
			       in the machine.	Note that "PVC" is  a  synonym
			       for "AAL5PVC".

       udp6:hostname:10161     perform	the  query using UDP/IPv6 datagrams to
			       port 10161 on hostname (which will be looked up
			       as an AAAA record).

       UDP6:[fe80::2d0:b7ff:fe21:c6c0]
			       perform	the  query using UDP/IPv6 datagrams to
			       port 161 at address fe80::2d0:b7ff:fe21:c6c0.

       tcpipv6:[::1]:1611      connect to port 1611 on the local host (::1  in
			       IPv6 parlance) using TCP/IPv6 and perform query
			       over that connection.

       dtlsudp:hostname:9161   Connects using SNMP over DTLS/UDP as documented
			       by  the	ISMS  working group (RFCs not yet pub-
			       lished as of this  date).   This	 will  require
			       that the TSM security model is in use (--defSe-
			       curityModel=tsm)	      and	that	   the
			       defX509ServerCerts,    defX509ClientPriv,   and
			       defX509ClientPub configuration tokens have been
			       set.

       ssh:hostname:22	       Connects	 using	SNMP over SSH as documented by
			       the ISMS working group (RFCs not yet  published
			       as  of  this date).  This will require that the
			       TSM security model is  in  use  (--defSecurity-
			       Model=tsm).

       Note  that  not	all  the transport domains listed above will always be
       available; for instance, hosts with no IPv6 support will not be able to
       use  udp6 transport addresses, and attempts to do so will result in the
       error "Unknown host".  Likewise, since AAL5 PVC support	is  only  cur-
       rently  available  on  Linux, it will fail with the same error on other
       platforms.

MIB PARSING OPTIONS
       The Net-SNMP MIB parser mostly adheres to the Structure	of  Management
       Information (SMI).  As that specification has changed through time, and
       in recognition of the (ahem) diversity in compliance expressed  in  MIB
       files,  additional  options  provide  more  flexibility	in reading MIB
       files.

       -Pc    Toggles whether ASN.1 comments should extend to the end  of  the
	      MIB source line.	Strictly speaking, a second appearance of "--"
	      should terminate the comment, but this breaks  some  MIB	files.
	      The default behaviour (to interpret comments correctly) can also
	      be set with the configuration token commentToEOL.

       -Pd    Disables the loading of MIB object DESCRIPTIONs when parsing MIB
	      files.   This  reduces  the amount of memory used by the running
	      application.

       -Pe    Toggles whether to show  errors  encountered  when  parsing  MIB
	      files.   These  include  references  to IMPORTed modules and MIB
	      objects that cannot be located in the MIB directory search list.
	      The  default  behaviour  can  also be set with the configuration
	      token showMibErrors.

       -PR    If the same MIB object (parent name and sub-identifier)  appears
	      multiple	times  in  the list of MIB definitions loaded, use the
	      last version to be read in.  By default, the first version  will
	      be  used, and any duplicates discarded.  This behaviour can also
	      be set with the configuration token mibReplaceWithLatest.

	      Such ordering is normally only relevant if  there	 are  two  MIB
	      files  with  conflicting object definitions for the same OID (or
	      different revisions of the same basic MIB object).

       -Pu    Toggles whether to allow the underline character in  MIB	object
	      names  and  other symbols.  Strictly speaking, this is not valid
	      SMI syntax, but some vendor MIB files define  such  names.   The
	      default  behaviour  can also be set with the configuration token
	      mibAllowUnderline.

       -Pw    Show various warning messages in parsing MIB files and  building
	      the  overall OID tree.  This can also be set with the configura-
	      tion directive mibWarningLevel 1

       -PW    Show some additional warning messages, mostly relating to	 pars-
	      ing  individual MIB objects.  This can also be set with the con-
	      figuration directive mibWarningLevel 2


OUTPUT OPTIONS
       The format of the output from SNMP commands  can	 be  controlled	 using
       various	parameters  of	the -O flag.  The effects of these sub-options
       can be seen by comparison with the  following  default  output  (unless
       otherwise specified):
	      $ snmpget -c public -v 1 localhost sysUpTime.0
	      SNMPv2-MIB::sysUpTime.0 = Timeticks: (14096763) 1 day, 15:09:27.63


       -Oa    Display  string  values as ASCII strings (unless there is a DIS-
	      PLAY-HINT	 defined  for  the  corresponding  MIB	object).    By
	      default,	the library attempts to determine whether the value is
	      a printable or binary string, and displays it accordingly.

	      This option does not affect objects that do have a Display Hint.

       -Ob    Display table indexes numerically, rather than trying to	inter-
	      pret the instance subidentifiers as string or OID values:
		  $ snmpgetnext -c public -v 1 localhost vacmSecurityModel
		  SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0."wes" = xxx
		  $ snmpgetnext -c public -v 1 -Ob localhost vacmSecurityModel
		  SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0.3.119.101.115 = xxx

       -Oe    Removes the symbolic labels from enumeration values:
		  $ snmpget -c public -v 1 localhost ipForwarding.0
		  IP-MIB::ipForwarding.0 = INTEGER: forwarding(1)
		  $ snmpget -c public -v 1 -Oe localhost ipForwarding.0
		  IP-MIB::ipForwarding.0 = INTEGER: 1

       -OE    Modifies index strings to escape the quote characters:
		  $ snmpgetnext -c public -v 1 localhost vacmSecurityModel
		  SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0."wes" = xxx
		  $ snmpgetnext -c public -v 1 -OE localhost vacmSecurityModel
		  SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0.\"wes\" = xxx

	      This allows the output to be reused in shell commands.

       -Of    Include the full list of MIB objects when displaying an OID:
		  .iso.org.dod.internet.mgmt.mib-2.system.sysUpTime.0 =
			     Timeticks: (14096763) 1 day, 15:09:27.63

       -On    Displays the OID numerically:
		  .1.3.6.1.2.1.1.3.0	=   Timeticks:	 (14096763)   1	  day,
	      15:09:27.63

       -Oq    Removes the equal sign  and  type	 information  when  displaying
	      varbind values:
		  SNMPv2-MIB::sysUpTime.0 1:15:09:27.63

       -OQ    Removes the type information when displaying varbind values:
		  SNMPv2-MIB::sysUpTime.0 = 1:15:09:27.63

       -Os    Display the MIB object name (plus any instance or other subiden-
	      tifiers):
		  sysUpTime.0 = Timeticks: (14096763) 1 day, 15:09:27.63

       -OS    Display the name of the MIB, as well as the object name:
		  SNMPv2-MIB::sysUpTime.0  =  Timeticks:  (14096763)  1	  day,
	      15:09:27.63

	      This is the default OID output format.

       -Ot    Display TimeTicks values as raw numbers:
		  SNMPv2-MIB::sysUpTime.0 = 14096763

       -OT    If  values  are printed as Hex strings, display a printable ver-
	      sion as well.

       -Ou    Display the OID in the traditional UCD-style (inherited from the
	      original	CMU code).  That means removing a series of "standard"
	      prefixes from the OID, and displaying the remaining list of  MIB
	      object names (plus any other subidentifiers):
		  system.sysUpTime.0	=   Timeticks:	 (14096763)   1	  day,
	      15:09:27.63

       -OU    Do not print the UNITS suffix at the end of the value.

       -Ov    Display the varbind value only, not the OID:
		  $ snmpget -c public -v 1 -Oe localhost ipForwarding.0
		  INTEGER: forwarding(1)

       -Ox    Display string values as Hex strings (unless there is a DISPLAY-
	      HINT defined for the corresponding MIB object).  By default, the
	      library attempts to determine whether the value is  a  printable
	      or binary string, and displays it accordingly.

	      This option does not affect objects that do have a Display Hint.

       -OX    Display table indexes in a more "program like" output, imitating
	      a traditional array-style index format:
		  $ snmpgetnext -c public -v 1 localhost ipv6RouteTable
		  IPv6-MIB::ipv6RouteIfIndex.63.254.1.0.255.0.0.0.0.0.0.0.0.0.0.0.64.1 = INTEGER: 2
		  $ snmpgetnext -c public -v 1 -OE localhost ipv6RouteTable
		  IPv6-MIB::ipv6RouteIfIndex[3ffe:100:ff00:0:0:0:0:0][64][1] = INTEGER: 2

       Most of these options can also be configured via configuration  tokens.
       See the snmp.conf(5) manual page for details.


LOGGING OPTIONS
       The  mechanism  and destination to use for logging of warning and error
       messages can be controlled by passing  various  parameters  to  the  -L
       flag.

       -Le    Log messages to the standard error stream.

       -Lf FILE
	      Log messages to the specified file.

       -Lo    Log messages to the standard output stream.

       -Ls FACILITY
	      Log  messages  via syslog, using the specified facility ('d' for
	      LOG_DAEMON, 'u' for LOG_USER, or '0'-'7' for LOG_LOCAL0  through
	      LOG_LOCAL7).

       There  are  also	 "upper case" versions of each of these options, which
       allow the corresponding logging mechanism to be restricted  to  certain
       priorities of message.  Using standard error logging as an example:

       -LE pri
	      will log messages of priority 'pri' and above to standard error.

       -LE p1-p2
	      will  log	 messages  with priority between 'p1' and 'p2' (inclu-
	      sive) to standard error.

       For -LF and -LS the priority specification comes	 before	 the  file  or
       facility token.	The priorities recognised are:

	      0 or !  for LOG_EMERG,
	      1 or a for LOG_ALERT,
	      2 or c for LOG_CRIT,
	      3 or e for LOG_ERR,
	      4 or w for LOG_WARNING,
	      5 or n for LOG_NOTICE,
	      6 or i for LOG_INFO, and
	      7 or d for LOG_DEBUG.

       Normal output is (or will be!) logged at a priority level of LOG_NOTICE


INPUT OPTIONS
       The  interpretation of input object names and the values to be assigned
       can be controlled using various parameters of the -I flag.  The default
       behaviour will be described at the end of this section.

       -Ib    specifies	 that  the  given name should be regarded as a regular
	      expression, to match (case-insensitively) against	 object	 names
	      in  the MIB tree.	 The "best" match will be used - calculated as
	      the one that matches the closest to the beginning	 of  the  node
	      name  and	 the highest in the tree.  For example, the MIB object
	      vacmSecurityModel could be matched by the expression vacmsecuri-
	      tymodel  (full name, but different case), or vacm.*model (regexp
	      pattern).

	      Note that '.' is a special character in regular expression  pat-
	      terns,  so the expression cannot specify instance subidentifiers
	      or more than one object name.  A "best  match"  expression  will
	      only  be	applied against single MIB object names.  For example,
	      the expression sys*ontact.0 would not match the instance sysCon-
	      tact.0 (although sys*ontact would match sysContact).  Similarly,
	      specifying  a   MIB   module   name   will   not	 succeed   (so
	      SNMPv2-MIB::sys.*ontact would not match either).

       -Ih    disables the use of DISPLAY-HINT information when assigning val-
	      ues.  This would then require providing the raw value:
		  snmpset ... HOST-RESOURCES-MIB::hrSystemDate.0
				  x "07 D2 0C 0A 02 04 06 08"
	      instead of a formatted version:
		  snmpset ... HOST-RESOURCES-MIB::hrSystemDate.0
				  = 2002-12-10,2:4:6.8

       -Ir    disables checking table indexes and the  value  to  be  assigned
	      against  the  relevant  MIB  definitions.	 This will (hopefully)
	      result in the remote agent reporting an invalid request,	rather
	      than  checking  (and  rejecting)	this  before it is sent to the
	      remote agent.

	      Local checks are more efficient (and  the	 diagnostics  provided
	      also  tend  to be more precise), but disabling this behaviour is
	      particularly useful when testing the remote agent.

       -IR    enables "random access" lookup of MIB names.  Rather  than  pro-
	      viding  a full OID path to the desired MIB object (or qualifying
	      this object with an explicit MIB module name), the MIB tree will
	      be    searched	for    the   matching	object	 name.	  Thus
	      .iso.org.dod.internet.mib-2.system.sysDescr.0		   (or
	      SNMPv2-MIB::sysDescr.0) can be specified simply as sysDescr.0.

	      Warning:
		     Since  MIB	 object	 names	are  not globally unique, this
		     approach may return a different MIB object	 depending  on
		     which MIB files have been loaded.

	      The  MIB-MODULE::objectName syntax has the advantage of uniquely
	      identifying a particular MIB object, as well as  being  slightly
	      more efficient (and automatically loading the necessary MIB file
	      if necessary).

       -Is SUFFIX
	      adds the specified suffix to each textual OID given on the  com-
	      mand  line.   This can be used to retrieve multiple objects from
	      the same row of a table, by specifying a common index value.

       -IS PREFIX
	      adds the specified prefix to each textual OID given on the  com-
	      mand  line.   This can be used to specify an explicit MIB module
	      name for all objects being retrieved (or for incurably lazy typ-
	      ists).

       -Iu    enables the traditional UCD-style approach to interpreting input
	      OIDs.  This assumes that OIDs are rooted at the 'mib-2' point in
	      the  tree	 (unless  they start with an explicit '.' or include a
	      MIB module name).	 So the sysDescr instance above would be  ref-
	      erenced as system.sysDescr.0.


       Object  names  specified	 with  a leading '.' are always interpreted as
       "fully qualified" OIDs, listing the sequence of MIB  objects  from  the
       root  of the MIB tree.  Such objects and those qualified by an explicit
       MIB module name are unaffected by the -Ib, -IR and -Iu flags.

       Otherwise, if none of  the  above  input	 options  are  specified,  the
       default behaviour for a "relative" OID is to try and interpret it as an
       (implicitly) fully qualified OID, then  apply  "random  access"	lookup
       (-IR), followed by "best match" pattern matching (-Ib).


ENVIRONMENT VARIABLES
       PREFIX The standard prefix for object identifiers (when using UCD-style
	      output).	Defaults to .iso.org.dod.internet.mgmt.mib-2

       MIBS   The list of MIBs to load. Defaults  to  SNMPv2-TC:SNMPv2-MIB:IF-
	      MIB:IP-MIB:TCP-MIB:UDP-MIB:SNMP-VACM-MIB.	  Overridden by the -m
	      option.

       MIBDIRS
	      The  list	 of  directories  to  search  for  MIBs.  Defaults  to
	      /usr/share/snmp/mibs.  Overridden by the -M option.


FILES
       /etc/snmp/snmpd.conf
	      Agent configuration file. See snmpd.conf(5).

       /etc/snmp/snmp.conf

       ~/.snmp/snmp.conf
	      Application configuration files. See snmp.conf(5).


SEE ALSO
       snmpget(1),   snmpgetnext(1),   snmpset(1),  snmpbulkget(1),  snmpbulk-
       walk(1),	 snmpwalk(1),  snmptable(1),   snmpnetstat(1),	 snmpdelta(1),
       snmptrap(1),  snmpinform(1),  snmpusm(1),  snmpstatus(1),  snmptest(1),
       snmp.conf(5).




4th Berkeley Distribution	  29 Jun 2005			    SNMPCMD(1)