Yolinux.com

LESSKEY manpage

Search topic Section


LESSKEY(1)		    General Commands Manual		    LESSKEY(1)



NAME
       lesskey - specify key bindings for less

SYNOPSIS
       lesskey [-o output] [--] [input]
       lesskey [--output=output] [--] [input]
       lesskey -V
       lesskey --version

DESCRIPTION
       Lesskey	is  used  to specify a set of key bindings to be used by less.
       The input file is a text file which describes the key bindings, If  the
       input  file is "-", standard input is read.  If no input file is speci-
       fied, a standard filename is used as the name of the input file,	 which
       depends	on  the	 system being used: On Unix systems, $HOME/.lesskey is
       used; on MS-DOS systems, $HOME/_lesskey is used; and  on	 OS/2  systems
       $HOME/lesskey.ini  is used, or $INIT/lesskey.ini if $HOME is undefined.
       The output file is a binary file which is used by less.	If  no	output
       file  is	 specified,  and  the environment variable LESSKEY is set, the
       value of LESSKEY is used as the name of the output file.	 Otherwise,  a
       standard filename is used as the name of the output file, which depends
       on the system being used: On Unix  and  OS-9  systems,  $HOME/.less  is
       used;  on  MS-DOS  systems,  $HOME/_less	 is used; and on OS/2 systems,
       $HOME/less.ini is used, or $INIT/less.ini if $HOME  is  undefined.   If
       the output file already exists, lesskey will overwrite it.

       The  -V	or --version option causes lesskey to print its version number
       and immediately exit.  If -V or --version is present, other options and
       arguments are ignored.

       The  input  file consists of one or more sections.  Each section starts
       with a line that identifies the type  of	 section.   Possible  sections
       are:

       #command
	      Defines new command keys.

       #line-edit
	      Defines new line-editing keys.

       #env   Defines environment variables.

       Blank  lines  and  lines which start with a pound sign (#) are ignored,
       except for the special section header lines.


COMMAND SECTION
       The command section begins with the line

       #command

       If the command section is the first section in the file, this line  may
       be omitted.  The command section consists of lines of the form:

	    string <whitespace> action [extra-string] <newline>

       Whitespace  is  any  sequence  of  one or more spaces and/or tabs.  The
       string is the command key(s) which invoke the action.  The  string  may
       be a single command key, or a sequence of up to 15 keys.	 The action is
       the name of the less action, from the list below.   The	characters  in
       the  string may appear literally, or be prefixed by a caret to indicate
       a control key.  A backslash followed by one to three octal  digits  may
       be  used	 to  specify a character by its octal value.  A backslash fol-
       lowed by certain characters specifies input characters as follows:

       \b     BACKSPACE

       \e     ESCAPE

       \n     NEWLINE

       \r     RETURN

       \t     TAB

       \ku    UP ARROW

       \kd    DOWN ARROW

       \kr    RIGHT ARROW

       \kl    LEFT ARROW

       \kU    PAGE UP

       \kD    PAGE DOWN

       \kh    HOME

       \ke    END

       \kx    DELETE

       A backslash followed by any other character indicates that character is
       to  be taken literally.	Characters which must be preceded by backslash
       include caret, space, tab and the backslash itself.

       An action may be followed by an "extra" string.	When such a command is
       entered while running less, the action is performed, and then the extra
       string is parsed, just as if it were typed in to	 less.	 This  feature
       can  be used in certain cases to extend the functionality of a command.
       For example, see the "{" and ":t" commands in the example  below.   The
       extra  string  has  a  special meaning for the "quit" action: when less
       quits, first character of the extra string is used as its exit status.


EXAMPLE
       The following input file describes the set of default command keys used
       by less:

	    #command
	    \r	      forw-line
	    \n	      forw-line
	    e	      forw-line
	    j	      forw-line
	    \kd	 forw-line
	    ^E	      forw-line
	    ^N	      forw-line
	    k	      back-line
	    y	      back-line
	    ^Y	      back-line
	    ^K	      back-line
	    ^P	      back-line
	    J	      forw-line-force
	    K	      back-line-force
	    Y	      back-line-force
	    d	      forw-scroll
	    ^D	      forw-scroll
	    u	      back-scroll
	    ^U	      back-scroll
	    \40	 forw-screen
	    f	      forw-screen
	    ^F	      forw-screen
	    ^V	      forw-screen
	    \kD	 forw-screen
	    b	      back-screen
	    ^B	      back-screen
	    \ev	      back-screen
	    \kU	 back-screen
	    z	      forw-window
	    w	      back-window
	    \e\40	   forw-screen-force
	    F	      forw-forever
	    R	      repaint-flush
	    r	      repaint
	    ^R	      repaint
	    ^L	      repaint
	    \eu	      undo-hilite
	    g	      goto-line
	    \kh	 goto-line
	    <	      goto-line
	    \e<	      goto-line
	    p	      percent
	    %	      percent
	    \e[	      left-scroll
	    \e]	      right-scroll
	    \e(	      left-scroll
	    \e)	      right-scroll
	    {	      forw-bracket {}
	    }	      back-bracket {}
	    (	      forw-bracket ()
	    )	      back-bracket ()
	    [	      forw-bracket []
	    ]	      back-bracket []
	    \e^F      forw-bracket
	    \e^B      back-bracket
	    G	      goto-end
	    \e>	      goto-end
	    >	      goto-end
	    \ke	 goto-end
	    =	      status
	    ^G	      status
	    :f	      status
	    /	      forw-search
	    ?	      back-search
	    \e/	      forw-search *
	    \e?	      back-search *
	    n	      repeat-search
	    \en	      repeat-search-all
	    N	      reverse-search
	    \eN	      reverse-search-all
	    &	      filter
	    m	      set-mark
	    '	      goto-mark
	    ^X^X      goto-mark
	    E	      examine
	    :e	      examine
	    ^X^V      examine
	    :n	      next-file
	    :p	      prev-file
	    t	      next-tag
	    T	      prev-tag
	    :x	      index-file
	    :d	      remove-file
	    -	      toggle-option
	    :t	      toggle-option t
	    s	      toggle-option o
	    _	      display-option
	    |	      pipe
	    v	      visual
	    !	      shell
	    +	      firstcmd
	    H	      help
	    h	      help
	    V	      version
	    0	      digit
	    1	      digit
	    2	      digit
	    3	      digit
	    4	      digit
	    5	      digit
	    6	      digit
	    7	      digit
	    8	      digit
	    9	      digit
	    q	      quit
	    Q	      quit
	    :q	      quit
	    :Q	      quit
	    ZZ	      quit


PRECEDENCE
       Commands	 specified  by	lesskey	 take precedence over the default com-
       mands.  A default command key may be disabled by including  it  in  the
       input  file  with  the  action  "invalid".  Alternatively, a key may be
       defined to do nothing by using the action  "noaction".	"noaction"  is
       similar to "invalid", but less will give an error beep for an "invalid"
       command, but not for a "noaction" command.  In  addition,  ALL  default
       commands may be disabled by adding this control line to the input file:

       #stop

       This  will  cause  all  default commands to be ignored.	The #stop line
       should be the last line in that section of the file.

       Be aware that #stop can be dangerous.  Since all default	 commands  are
       disabled, you must provide sufficient commands before the #stop line to
       enable all necessary actions.  For example, failure to provide a "quit"
       command can lead to frustration.


LINE EDITING SECTION
       The line-editing section begins with the line:

       #line-edit

       This  section specifies new key bindings for the line editing commands,
       in a manner similar to the way key bindings for ordinary	 commands  are
       specified  in  the #command section.  The line-editing section consists
       of a list of keys and actions, one per line as in the example below.


EXAMPLE
       The following input file describes the set of default line-editing keys
       used by less:

	    #line-edit
	    \t	      forw-complete
	    \17	      back-complete
	    \e\t      back-complete
	    ^L	      expand
	    ^V	      literal
	    ^A	      literal
	    \el	      right
	    \kr	      right
	    \eh	      left
	    \kl	      left
	    \eb	      word-left
	    \e\kl     word-left
	    \ew	      word-right
	    \e\kr     word-right
	    \ei	      insert
	    \ex	      delete
	    \kx	      delete
	    \eX	      word-delete
	    \ekx      word-delete
	    \e\b      word-backspace
	    \e0	      home
	    \kh	      home
	    \e$	      end
	    \ke	      end
	    \ek	      up
	    \ku	      up
	    \ej	      down



LESS ENVIRONMENT VARIABLES
       The environment variable section begins with the line

       #env

       Following  this	line  is  a  list of environment variable assignments.
       Each line consists of an environment variable name, an equals sign  (=)
       and  the value to be assigned to the environment variable.  White space
       before and after the equals sign is  ignored.   Variables  assigned  in
       this  way  are visible only to less.  If a variable is specified in the
       system environment and also in a lesskey file, the value in the lesskey
       file  takes precedence.	Although the lesskey file can be used to over-
       ride variables set in the environment, the main	purpose	 of  assigning
       variables  in the lesskey file is simply to have all less configuration
       information stored in one file.


EXAMPLE
       The following input file sets the -i option whenever less is  run,  and
       specifies the character set to be "latin1":

	    #env
	    LESS = -i
	    LESSCHARSET = latin1



SEE ALSO
       less(1)


WARNINGS
       It  is not possible to specify special keys, such as uparrow, in a key-
       board-independent manner.  The only way to  specify  such  keys	is  to
       specify the escape sequence which a particular keyboard sends when such
       a key is pressed.

       On MS-DOS and OS/2 systems, certain keys send a sequence of  characters
       which  start  with  a  NUL character (0).  This NUL character should be
       represented as \340 in a lesskey file.


COPYRIGHT
       Copyright (C) 2000-2009	Mark Nudelman

       lesskey is part of the GNU project and is free software; you can redis-
       tribute	it  and/or modify it under the terms of the GNU General Public
       License as published by the Free Software Foundation; either version 2,
       or (at your option) any later version.

       lesskey	is distributed in the hope that it will be useful, but WITHOUT
       ANY WARRANTY; without even the implied warranty of  MERCHANTABILITY  or
       FITNESS	FOR  A PARTICULAR PURPOSE.  See the GNU General Public License
       for more details.

       You should have received a copy of the GNU General Public License along
       with lesskey; see the file COPYING.  If not, write to the Free Software
       Foundation, 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.


AUTHOR
       Mark Nudelman <markn@greenwoodsoftware.com>
       Send  bug  reports  or  comments	 to  the  above	 address  or  to  bug-
       less@gnu.org.




			   Version 436: 07 Jul 2009		    LESSKEY(1)