Yolinux.com

exportfs manpage

Search topic Section


exportfs(8)		    System Manager's Manual		   exportfs(8)



NAME
       exportfs - maintain table of exported NFS file systems

SYNOPSIS
       /usr/sbin/exportfs [-avi] [-o options,..] [client:/path ..]
       /usr/sbin/exportfs -r [-v]
       /usr/sbin/exportfs [-av] -u [client:/path ..]
       /usr/sbin/exportfs [-v]
       /usr/sbin/exportfs -f
       /usr/sbin/exportfs -s

DESCRIPTION
       An NFS server maintains a table of local physical file systems that are
       accessible to NFS clients.  Each file system in this table is  referred
       to as an exported file system, or export, for short.

       The exportfs command maintains the current table of exports for the NFS
       server.	 The  master  export  table  is	  kept	 in   a	  file	 named
       /var/lib/nfs/etab.  This file is read by rpc.mountd when a client sends
       an NFS MOUNT request.

       Normally the master export table is initialized with  the  contents  of
       /etc/exports  and  files	 under /etc/exports.d by invoking exportfs -a.
       However, a system administrator can choose to  add  or  delete  exports
       without	modifying  /etc/exports or files under /etc/exports.d by using
       the exportfs command.

       exportfs and its partner program rpc.mountd work in one of two modes: a
       legacy mode which applies to 2.4 and earlier versions of the Linux ker-
       nel, and a new mode which applies to 2.6 and later versions,  providing
       the  nfsd  virtual  filesystem  has  been  mounted  at /proc/fs/nfsd or
       /proc/fs/nfs.  On 2.6 kernels, if this filesystem is not	 mounted,  the
       legacy mode is used.

       In  the new mode, exportfs does not give any information to the kernel,
       but provides it only to rpc.mountd through the /var/lib/nfs/etab	 file.
       rpc.mountd  then manages kernel requests for information about exports,
       as needed.

       In the legacy mode, exports which identify a specific host, rather than
       a subnet or netgroup, are entered directly into the kernel's export ta-
       ble, as well as being written to /var/lib/nfs/etab.   Further,  exports
       listed  in  /var/lib/nfs/rmtab  which  match a non host-specific export
       request will cause an appropriate export entry for the  host  given  in
       rmtab to be added to the kernel's export table.

OPTIONS
       -a     Export or unexport all directories.

       -o options,...
	      Specify  a  list	of  export  options  in	 the same manner as in
	      exports(5).

       -i     Ignore the /etc/exports  file  and  files	 under	/etc/exports.d
	      directory.   Only	 default options and options given on the com-
	      mand line are used.

       -r     Reexport all directories, synchronizing  /var/lib/nfs/etab  with
	      /etc/exports   and  files	 under	/etc/exports.d.	  This	option
	      removes entries in /var/lib/nfs/etab  which  have	 been  deleted
	      from /etc/exports or files under /etc/exports.d, and removes any
	      entries from the kernel export table which are no longer valid.

       -u     Unexport one or more directories.

       -f     If /proc/fs/nfsd or /proc/fs/nfs is  mounted,  flush  everything
	      out  of  the  kernel's  export  table.  Fresh entries for active
	      clients are added to the kernel's	 export	 table	by  rpc.mountd
	      when they make their next NFS mount request.

       -v     Be verbose. When exporting or unexporting, show what's going on.
	      When displaying the current export list, also display  the  list
	      of export options.

       -s     Display the current export list suitable for /etc/exports.

DISCUSSION
   Exporting Directories
       The first synopsis shows how to invoke exportfs when adding new entries
       to the export table.  When using exportfs -a,  all  exports  listed  in
       /etc/exports    and   files   under   /etc/exports.d   are   added   to
       /var/lib/nfs/etab.  The	kernel's  export  table	 is  also  updated  as
       needed.

       The  host:/path	argument  specifies a local directory to export, along
       with the client or  clients  who	 are  permitted	 to  access  it.   See
       exports(5)  for a description of supported options and access list for-
       mats.

       IPv6 presentation addresses contain colons, which are already  used  to
       separate the "host" and "path" command line arguments.  When specifying
       a client using a raw IPv6 address, enclose the address in square brack-
       ets.  For IPv6 network addresses, place the prefix just after the clos-
       ing bracket.

       To export a directory to the world, simply specify :/path.

       The export options for a particular  host/directory  pair  derive  from
       several	   sources.	 The	 default     export	options	   are
       sync,ro,root_squash,wdelay.  These can  be  overridden  by  entries  in
       /etc/exports or files under /etc/exports.d.

       A  system  administrator	 may override options from these sources using
       the -o command-line option on exportfs.	This option takes a comma-sep-
       arated list of options in the same fashion as one would specify them in
       /etc/exports.  In this way exportfs can be used to  modify  the	export
       options of an already exported directory.

   Unexporting Directories
       The  third  synopsis  shows how to unexport a currently exported direc-
       tory.  When using exportfs -ua, all entries listed in /var/lib/nfs/etab
       are  removed  from  the	kernel export tables, and the file is cleared.
       This effectively shuts down all NFS activity.

       To remove an export, specify a host:/path pair. This deletes the speci-
       fied  entry from /var/lib/nfs/etab and removes the corresponding kernel
       entry (if any).

   Dumping the Export Table
       Invoking exportfs without options shows the current  list  of  exported
       file  systems.	Adding	the  -v	 option causes exportfs to display the
       export options for each export.

EXAMPLES
       The following adds all directories listed  in  /etc/exports  and	 files
       under  /etc/exports.d  to  /var/lib/nfs/etab  and  pushes the resulting
       export entries into the kernel:

       # exportfs -a

       To export the /usr/tmp directory to host django, allowing insecure file
       locking requests from clients:

       # exportfs -o insecure_locks django:/usr/tmp

       To unexport the /usr/tmp directory:

       # exportfs -u django:/usr/tmp

       To  unexport  all  exports  listed  in  /etc/exports  and  files	 under
       /etc/exports.d:

       # exportfs -au

       To export the /usr/tmp directory to IPv6 link-local clients:

       # exportfs [fe80::]/64:/usr/tmp

USAGE NOTES
       Exporting to IP networks or DNS and NIS domains does not enable clients
       from  these  groups  to access NFS immediately.	Rather, these sorts of
       exports are hints to rpc.mountd(8) to grant  any	 mount	requests  from
       these  clients.	 This  is  usually not a problem, because any existing
       mounts are preserved in rmtab across reboots.

       When unexporting a network or domain entry, any current exports to mem-
       bers  of this group will be checked against the remaining valid exports
       and if they themselves are no longer valid they will be removed.

FILES
       /etc/exports		input file listing  exports,  export  options,
				and access control lists

       /etc/exports.d		directory  where extra input files are stored.
				Note: only files that end  with	 .exports  are
				used.

       /var/lib/nfs/etab	master table of exports

       /var/lib/nfs/rmtab	table of clients accessing server's exports

SEE ALSO
       exports(5), rpc.mountd(8), netgroup(5)

AUTHORS
       Olaf Kirch <okir@monad.swb.de>
       Neil Brown <neilb@cse.unsw.edu.au>



			       30 September 2013		   exportfs(8)