Yolinux.com

getent manpage

Search topic Section


GETENT(1)			 User Commands			     GETENT(1)



NAME
       getent - get entries from Name Service Switch libraries

SYNOPSIS
       getent [option]... database key...

DESCRIPTION
       The  getent  command  displays  entries from databases supported by the
       Name Service  Switch  libraries,	 which	are  configured	 in  /etc/nss-
       witch.conf.   If	 one or more key arguments are provided, then only the
       entries that match the supplied keys will be displayed.	Otherwise,  if
       no  key is provided, all entries will be displayed (unless the database
       does not support enumeration).

       The database may be any of those supported by the GNU C Library, listed
       below:

	  ahosts    When no key is provided, use sethostent(3), gethostent(3),
		    and endhostent(3) to enumerate the hosts  database.	  This
		    is	identical  to using hosts.  When one or more key argu-
		    ments are provided, pass each key in succession to	getad-
		    drinfo(3)  with  the address family AF_UNSPEC, enumerating
		    each socket address structure returned.

	  ahostsv4  Same as ahosts, but use the address family AF_INET.

	  ahostsv6  Same as ahosts, but use the address family AF_INET6.   The
		    call   to	getaddrinfo(3)	 in  this  case	 includes  the
		    AI_V4MAPPED flag.

	  aliases   When  no  key  is  provided,  use  setaliasent(3),	getal-
		    iasent(3),	and  endaliasent(3)  to	 enumerate the aliases
		    database.  When one or more key  arguments	are  provided,
		    pass  each key in succession to getaliasbyname(3) and dis-
		    play the result.

	  ethers    When one or more key arguments are provided, pass each key
		    in	succession to ether_aton(3) and ether_hostton(3) until
		    a result is obtained, and display the result.  Enumeration
		    is not supported on ethers, so a key must be provided.

	  group	    When no key is provided, use setgrent(3), getgrent(3), and
		    endgrent(3) to enumerate the group database.  When one  or
		    more  key arguments are provided, pass each numeric key to
		    getgrgid(3) and each nonnumeric  key  to  getgrnam(3)  and
		    display the result.

	  gshadow   When no key is provided, use setsgent(3), getsgent(3), and
		    endsgent(3) to enumerate the gshadow database.   When  one
		    or	more key arguments are provided, pass each key in suc-
		    cession to getsgnam(3) and display the result.

	  hosts	    When no key is provided, use sethostent(3), gethostent(3),
		    and	 endhostent(3)	to enumerate the hosts database.  When
		    one or more key arguments are provided, pass each  key  to
		    gethostbyaddr(3)   or   gethostbyname2(3),	 depending  on
		    whether a call to inet_pton(3) indicates that the  key  is
		    an IPv6 or IPv4 address or not, and display the result.

	  initgroups
		    When one or more key arguments are provided, pass each key
		    in succession to getgrouplist(3) and display  the  result.
		    Enumeration	 is not supported on initgroups, so a key must
		    be provided.

	  netgroup  When one key is provided, pass the key  to	setnetgrent(3)
		    and,  using	 getnetgrent(3)	 display  the resulting string
		    triple (hostname, username,	 domainname).	Alternatively,
		    three  keys	 may be provided, which are interpreted as the
		    hostname, username and domainname to match to  a  netgroup
		    name via innetgr(3).  Enumeration is not supported on net-
		    group, so either one or three keys must be provided.

	  networks  When no key is provided, use  setnetent(3),	 getnetent(3),
		    and endnetent(3) to enumerate the networks database.  When
		    one or more key arguments are provided, pass each  numeric
		    key	 to getnetbyaddr(3) and each nonnumeric key to getnet-
		    byname(3) and display the result.

	  passwd    When no key is provided, use setpwent(3), getpwent(3), and
		    endpwent(3) to enumerate the passwd database.  When one or
		    more key arguments are provided, pass each numeric key  to
		    getpwuid(3)	 and  each  nonnumeric	key to getpwnam(3) and
		    display the result.

	  protocols When no  key  is  provided,	 use  setprotoent(3),  getpro-
		    toent(3),  and  endprotoent(3)  to enumerate the protocols
		    database.  When one or more key  arguments	are  provided,
		    pass each numeric key to getprotobynumber(3) and each non-
		    numeric key to getprotobyname(3) and display the result.

	  rpc	    When no key is provided, use  setrpcent(3),	 getrpcent(3),
		    and	 endrpcent(3) to enumerate the rpc database.  When one
		    or more key arguments are provided, pass each numeric  key
		    to	getrpcbynumber(3) and each nonnumeric key to getrpcby-
		    name(3) and display the result.

	  services  When no key is provided, use setservent(3), getservent(3),
		    and	 endservent(3)	to  enumerate  the  services database.
		    When one or more key arguments  are	 provided,  pass  each
		    numeric  key to getservbynumber(3) and each nonnumeric key
		    to getservbyname(3) and display the result.

	  shadow    When no key is provided, use setspent(3), getspent(3), and
		    endspent(3) to enumerate the shadow database.  When one or
		    more key arguments are provided, pass each key in  succes-
		    sion to getspnam(3) and display the result.

OPTIONS
       -s service, --service service
	      Override all databases with the specified service.  (Since glibc
	      2.2.5.)

       -s database:service, --service database:service
	      Override only specified databases with  the  specified  service.
	      The option may be used multiple times, but only the last service
	      for each database will be used.  (Since glibc 2.4.)

       -i, --no-idn
	      Disables	IDN  encoding  in  lookups  for	 ahosts/getaddrinfo(3)
	      (Since glibc-2.13.)

       -?, --help
	      Print a usage summary and exit.

       --usage
	      Print a short usage summary and exit.

       -V, --version
	      Print  the  version  number, license, and disclaimer of warranty
	      for getent.

EXIT STATUS
       One of the following exit values can be returned by getent:

	  0	    Command completed successfully.

	  1	    Missing arguments, or database unknown.

	  2	    One or more supplied key could not be found in  the	 data-
		    base.

	  3	    Enumeration not supported on this database.

SEE ALSO
       nsswitch.conf(5)

COLOPHON
       This  page  is  part of release 4.10 of the Linux man-pages project.  A
       description of the project, information about reporting bugs,  and  the
       latest	  version     of     this    page,    can    be	   found    at
       https://www.kernel.org/doc/man-pages/.



Linux				  2015-04-19			     GETENT(1)